reading in data... ATMS 502/CSE 566 - Program 4, Fall 2013 Case 1, domain (106,106), cone type=1, radius=0.08, origin ( 0.00, 0.30), (*****,-0.30) Nest refinement 3:1, check every 5 steps Time step 0.008727, # of steps 360 Time steps to be plotted: -10 Method: 2nd-order Crowley Nest feedback to coarse grid is OFF. Time interpolation of nest borders is OFF. Step Time Max at I , J Min at I , J --------------------------------------------------- 0 0.00000 9.90086 53 85 0.00000 1 1 INITIAL NEST at time step 1 Max trunc error = 2.3406 bounded by ( 45: 62 , 80: 90); center = ( 53, 85) PLACING nest; N= 1 TruncErr center 53 85 nest bounds: X = ( 36: 71), Y = ( 68:103) Interpolating > coarse to nest; step 1, nestX1,Y1 36 68, ratio 3 Interpolating > coarse to nest; step 1, nestX1,Y1 36 68, ratio 3 time_interp F == No feedback to coarse grid == 1 0.00873 9.99608 53 85 -0.05481 61 86 2 0.01745 9.92313 52 85 -0.07365 61 85 3 0.02618 9.98341 52 85 -0.10712 60 86 4 0.03491 9.93725 51 85 -0.12234 60 85 NEST CHECK at time step 5 Max trunc error = 2.4401 bounded by ( 43: 60 , 80: 90); center = ( 51, 85) Old nest saved: X1,X2,Y1,Y2= 36 71 68 103 MOVING nest; N= 5 TruncErr center 51 85 nest bounds: X = ( 34: 69), Y = ( 68:103) Interpolating > coarse to nest w/nest copy; step 5, nestX1,Y1 34 68, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 5, nestX1,Y1 34 68, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap 5 0.04363 9.96091 51 85 -0.15203 59 86 6 0.05236 9.93758 50 85 -0.16225 59 85 7 0.06109 9.92204 50 85 -0.19226 58 86 8 0.06981 9.91541 49 85 -0.19692 58 85 9 0.07854 9.85739 49 85 -0.22861 57 86 NEST CHECK at time step 10 Max trunc error = 2.5582 bounded by ( 41: 58 , 80: 89); center = ( 49, 84) Old nest saved: X1,X2,Y1,Y2= 34 69 68 103 MOVING nest; N= 10 TruncErr center 49 84 nest bounds: X = ( 32: 67), Y = ( 67:102) Interpolating > coarse to nest w/nest copy; step 10, nestX1,Y1 32 67, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 10, nestX1,Y1 32 67, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap 10 0.08727 9.86247 48 84 -0.22784 57 85 Plotting coarse grid fields at n= 10 NEST CHECK at time step 15 Max trunc error = 2.6064 bounded by ( 41: 55 , 80: 89); center = ( 48, 84) Old nest saved: X1,X2,Y1,Y2= 32 67 67 102 MOVING nest; N= 15 TruncErr center 48 84 nest bounds: X = ( 31: 66), Y = ( 67:102) Interpolating > coarse to nest w/nest copy; step 15, nestX1,Y1 31 67, ratio 3 Dointerp: copying from old nest ( 1:103, 1:106) to new ( 4:106, 1:106); 97.2% overlap Interpolating > coarse to nest w/nest copy; step 15, nestX1,Y1 31 67, ratio 3 Dointerp: copying from old nest ( 1:103, 1:106) to new ( 4:106, 1:106); 97.2% overlap NEST CHECK at time step 20 Max trunc error = 2.6049 bounded by ( 39: 53 , 79: 88); center = ( 46, 83) Old nest saved: X1,X2,Y1,Y2= 31 66 67 102 MOVING nest; N= 20 TruncErr center 46 83 nest bounds: X = ( 29: 64), Y = ( 66:101) Interpolating > coarse to nest w/nest copy; step 20, nestX1,Y1 29 66, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 20, nestX1,Y1 29 66, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap 20 0.17453 9.93140 43 83 -0.37154 51 86 Plotting coarse grid fields at n= 20 NEST CHECK at time step 25 Max trunc error = 2.4569 bounded by ( 36: 51 , 78: 91); center = ( 43, 84) Old nest saved: X1,X2,Y1,Y2= 29 64 66 101 MOVING nest; N= 25 TruncErr center 43 84 nest bounds: X = ( 26: 61), Y = ( 67:102) Interpolating > coarse to nest w/nest copy; step 25, nestX1,Y1 26 67, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 25, nestX1,Y1 26 67, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap NEST CHECK at time step 30 Max trunc error = 2.3775 bounded by ( 34: 48 , 77: 90); center = ( 41, 83) Old nest saved: X1,X2,Y1,Y2= 26 61 67 102 MOVING nest; N= 30 TruncErr center 41 83 nest bounds: X = ( 24: 59), Y = ( 66:101) Interpolating > coarse to nest w/nest copy; step 30, nestX1,Y1 24 66, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 30, nestX1,Y1 24 66, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap 30 0.26180 9.90582 38 81 -0.48002 46 84 Plotting coarse grid fields at n= 30 NEST CHECK at time step 35 Max trunc error = 2.3779 bounded by ( 32: 46 , 75: 89); center = ( 39, 82) Old nest saved: X1,X2,Y1,Y2= 24 59 66 101 MOVING nest; N= 35 TruncErr center 39 82 nest bounds: X = ( 22: 57), Y = ( 65:100) Interpolating > coarse to nest w/nest copy; step 35, nestX1,Y1 22 65, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 35, nestX1,Y1 22 65, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap NEST CHECK at time step 40 Max trunc error = 2.5826 bounded by ( 30: 44 , 74: 87); center = ( 37, 80) Old nest saved: X1,X2,Y1,Y2= 22 57 65 100 MOVING nest; N= 40 TruncErr center 37 80 nest bounds: X = ( 20: 55), Y = ( 63: 98) Interpolating > coarse to nest w/nest copy; step 40, nestX1,Y1 20 63, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 40, nestX1,Y1 20 63, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap 40 0.34907 9.79979 34 78 -0.57333 42 81 Plotting coarse grid fields at n= 40 NEST CHECK at time step 45 Max trunc error = 2.5442 bounded by ( 28: 42 , 72: 86); center = ( 35, 79) Old nest saved: X1,X2,Y1,Y2= 20 55 63 98 MOVING nest; N= 45 TruncErr center 35 79 nest bounds: X = ( 18: 53), Y = ( 62: 97) Interpolating > coarse to nest w/nest copy; step 45, nestX1,Y1 18 62, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 45, nestX1,Y1 18 62, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap NEST CHECK at time step 50 Max trunc error = 2.5998 bounded by ( 26: 40 , 70: 84); center = ( 33, 77) Old nest saved: X1,X2,Y1,Y2= 18 53 62 97 MOVING nest; N= 50 TruncErr center 33 77 nest bounds: X = ( 16: 51), Y = ( 60: 95) Interpolating > coarse to nest w/nest copy; step 50, nestX1,Y1 16 60, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 50, nestX1,Y1 16 60, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap 50 0.43633 9.89427 30 74 -0.62943 38 77 Plotting coarse grid fields at n= 50 NEST CHECK at time step 55 Max trunc error = 2.5815 bounded by ( 24: 38 , 68: 82); center = ( 31, 75) Old nest saved: X1,X2,Y1,Y2= 16 51 60 95 MOVING nest; N= 55 TruncErr center 31 75 nest bounds: X = ( 14: 49), Y = ( 58: 93) Interpolating > coarse to nest w/nest copy; step 55, nestX1,Y1 14 58, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 55, nestX1,Y1 14 58, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap NEST CHECK at time step 60 Max trunc error = 2.5120 bounded by ( 23: 31 , 66: 80); center = ( 27, 73) Old nest saved: X1,X2,Y1,Y2= 14 49 58 93 MOVING nest; N= 60 TruncErr center 27 73 nest bounds: X = ( 10: 45), Y = ( 56: 91) Interpolating > coarse to nest w/nest copy; step 60, nestX1,Y1 10 56, ratio 3 Dointerp: copying from old nest ( 1: 94, 1:100) to new ( 13:106, 7:106); 83.7% overlap Interpolating > coarse to nest w/nest copy; step 60, nestX1,Y1 10 56, ratio 3 Dointerp: copying from old nest ( 1: 94, 1:100) to new ( 13:106, 7:106); 83.7% overlap 60 0.52360 9.78465 27 70 -0.67429 35 73 Plotting coarse grid fields at n= 60 NEST CHECK at time step 65 Max trunc error = 2.4112 bounded by ( 21: 30 , 64: 77); center = ( 25, 70) Old nest saved: X1,X2,Y1,Y2= 10 45 56 91 MOVING nest; N= 65 TruncErr center 25 70 nest bounds: X = ( 8: 43), Y = ( 53: 88) Interpolating > coarse to nest w/nest copy; step 65, nestX1,Y1 8 53, ratio 3 Dointerp: copying from old nest ( 1:100, 1: 97) to new ( 7:106, 10:106); 86.3% overlap Interpolating > coarse to nest w/nest copy; step 65, nestX1,Y1 8 53, ratio 3 Dointerp: copying from old nest ( 1:100, 1: 97) to new ( 7:106, 10:106); 86.3% overlap NEST CHECK at time step 70 Max trunc error = 2.3781 bounded by ( 20: 28 , 61: 75); center = ( 24, 68) Old nest saved: X1,X2,Y1,Y2= 8 43 53 88 MOVING nest; N= 70 TruncErr center 24 68 nest bounds: X = ( 7: 42), Y = ( 51: 86) Interpolating > coarse to nest w/nest copy; step 70, nestX1,Y1 7 51, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 70, nestX1,Y1 7 51, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap 70 0.61087 9.78382 24 65 -0.70598 32 69 Plotting coarse grid fields at n= 70 NEST CHECK at time step 75 Max trunc error = 2.3289 bounded by ( 19: 27 , 59: 73); center = ( 23, 66) Old nest saved: X1,X2,Y1,Y2= 7 42 51 86 MOVING nest; N= 75 TruncErr center 23 66 nest bounds: X = ( 6: 41), Y = ( 49: 84) Interpolating > coarse to nest w/nest copy; step 75, nestX1,Y1 6 49, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 75, nestX1,Y1 6 49, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap NEST CHECK at time step 80 Max trunc error = 2.3831 bounded by ( 19: 27 , 56: 70); center = ( 23, 63) Old nest saved: X1,X2,Y1,Y2= 6 41 49 84 MOVING nest; N= 80 TruncErr center 23 63 nest bounds: X = ( 6: 41), Y = ( 46: 81) Interpolating > coarse to nest w/nest copy; step 80, nestX1,Y1 6 46, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 80, nestX1,Y1 6 46, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap 80 0.69813 9.68022 23 60 -0.71806 30 65 Plotting coarse grid fields at n= 80 NEST CHECK at time step 85 Max trunc error = 2.3714 bounded by ( 18: 26 , 54: 67); center = ( 22, 60) Old nest saved: X1,X2,Y1,Y2= 6 41 46 81 MOVING nest; N= 85 TruncErr center 22 60 nest bounds: X = ( 5: 40), Y = ( 43: 78) Interpolating > coarse to nest w/nest copy; step 85, nestX1,Y1 5 43, ratio 3 Dointerp: copying from old nest ( 1:103, 1: 97) to new ( 4:106, 10:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 85, nestX1,Y1 5 43, ratio 3 Dointerp: copying from old nest ( 1:103, 1: 97) to new ( 4:106, 10:106); 88.9% overlap NEST CHECK at time step 90 Max trunc error = 2.3961 bounded by ( 18: 26 , 51: 60); center = ( 22, 55) Old nest saved: X1,X2,Y1,Y2= 5 40 43 78 MOVING nest; N= 90 TruncErr center 22 55 nest bounds: X = ( 5: 40), Y = ( 38: 73) Interpolating > coarse to nest w/nest copy; step 90, nestX1,Y1 5 38, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 91) to new ( 1:106, 16:106); 85.8% overlap Interpolating > coarse to nest w/nest copy; step 90, nestX1,Y1 5 38, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 91) to new ( 1:106, 16:106); 85.8% overlap 90 0.78540 9.54669 22 55 -0.72853 18 62 Plotting coarse grid fields at n= 90 NEST CHECK at time step 95 Max trunc error = 2.3242 bounded by ( 18: 26 , 49: 62); center = ( 22, 55) Old nest saved: X1,X2,Y1,Y2= 5 40 38 73 MOVING nest; N= 95 TruncErr center 22 55 nest bounds: X = ( 5: 40), Y = ( 38: 73) Interpolating > coarse to nest w/nest copy; step 95, nestX1,Y1 5 38, ratio 3 Dointerp: copying from old nest ( 1:106, 1:106) to new ( 1:106, 1:106); 100.0% overlap Interpolating > coarse to nest w/nest copy; step 95, nestX1,Y1 5 38, ratio 3 Dointerp: copying from old nest ( 1:106, 1:106) to new ( 1:106, 1:106); 100.0% overlap NEST CHECK at time step 100 Max trunc error = 2.3463 bounded by ( 18: 26 , 46: 55); center = ( 22, 50) Old nest saved: X1,X2,Y1,Y2= 5 40 38 73 MOVING nest; N=100 TruncErr center 22 50 nest bounds: X = ( 5: 40), Y = ( 33: 68) Interpolating > coarse to nest w/nest copy; step 100, nestX1,Y1 5 33, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 91) to new ( 1:106, 16:106); 85.8% overlap Interpolating > coarse to nest w/nest copy; step 100, nestX1,Y1 5 33, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 91) to new ( 1:106, 16:106); 85.8% overlap 100 0.87266 9.52693 22 49 -0.80165 22 58 Plotting coarse grid fields at n= 100 NEST CHECK at time step 105 Max trunc error = 2.2483 bounded by ( 19: 26 , 43: 57); center = ( 22, 50) Old nest saved: X1,X2,Y1,Y2= 5 40 33 68 MOVING nest; N=105 TruncErr center 22 50 nest bounds: X = ( 5: 40), Y = ( 33: 68) Interpolating > coarse to nest w/nest copy; step 105, nestX1,Y1 5 33, ratio 3 Dointerp: copying from old nest ( 1:106, 1:106) to new ( 1:106, 1:106); 100.0% overlap Interpolating > coarse to nest w/nest copy; step 105, nestX1,Y1 5 33, ratio 3 Dointerp: copying from old nest ( 1:106, 1:106) to new ( 1:106, 1:106); 100.0% overlap NEST CHECK at time step 110 Max trunc error = 2.2424 bounded by ( 19: 27 , 41: 54); center = ( 23, 47) Old nest saved: X1,X2,Y1,Y2= 5 40 33 68 MOVING nest; N=110 TruncErr center 23 47 nest bounds: X = ( 6: 41), Y = ( 30: 65) Interpolating > coarse to nest w/nest copy; step 110, nestX1,Y1 6 30, ratio 3 Dointerp: copying from old nest ( 4:106, 1: 97) to new ( 1:103, 10:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 110, nestX1,Y1 6 30, ratio 3 Dointerp: copying from old nest ( 4:106, 1: 97) to new ( 1:103, 10:106); 88.9% overlap 110 0.95993 9.40923 23 44 -0.86898 23 53 Plotting coarse grid fields at n= 110 NEST CHECK at time step 115 Max trunc error = 2.1410 bounded by ( 20: 28 , 38: 52); center = ( 24, 45) Old nest saved: X1,X2,Y1,Y2= 6 41 30 65 MOVING nest; N=115 TruncErr center 24 45 nest bounds: X = ( 7: 42), Y = ( 28: 63) Interpolating > coarse to nest w/nest copy; step 115, nestX1,Y1 7 28, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 115, nestX1,Y1 7 28, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap NEST CHECK at time step 120 Max trunc error = 2.1091 bounded by ( 21: 29 , 36: 50); center = ( 25, 43) Old nest saved: X1,X2,Y1,Y2= 7 42 28 63 MOVING nest; N=120 TruncErr center 25 43 nest bounds: X = ( 8: 43), Y = ( 26: 61) Interpolating > coarse to nest w/nest copy; step 120, nestX1,Y1 8 26, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 120, nestX1,Y1 8 26, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap 120 1.04720 9.32549 25 39 -0.95316 22 47 Plotting coarse grid fields at n= 120 NEST CHECK at time step 125 Max trunc error = 2.0120 bounded by ( 17: 30 , 33: 47); center = ( 23, 40) Old nest saved: X1,X2,Y1,Y2= 8 43 26 61 MOVING nest; N=125 TruncErr center 23 40 nest bounds: X = ( 6: 41), Y = ( 23: 58) Interpolating > coarse to nest w/nest copy; step 125, nestX1,Y1 6 23, ratio 3 Dointerp: copying from old nest ( 1:100, 1: 97) to new ( 7:106, 10:106); 86.3% overlap Interpolating > coarse to nest w/nest copy; step 125, nestX1,Y1 6 23, ratio 3 Dointerp: copying from old nest ( 1:100, 1: 97) to new ( 7:106, 10:106); 86.3% overlap NEST CHECK at time step 130 Max trunc error = 1.9377 bounded by ( 18: 32 , 30: 45); center = ( 25, 37) Old nest saved: X1,X2,Y1,Y2= 6 41 23 58 MOVING nest; N=130 TruncErr center 25 37 nest bounds: X = ( 8: 43), Y = ( 20: 55) Interpolating > coarse to nest w/nest copy; step 130, nestX1,Y1 8 20, ratio 3 Dointerp: copying from old nest ( 7:106, 1: 97) to new ( 1:100, 10:106); 86.3% overlap Interpolating > coarse to nest w/nest copy; step 130, nestX1,Y1 8 20, ratio 3 Dointerp: copying from old nest ( 7:106, 1: 97) to new ( 1:100, 10:106); 86.3% overlap 130 1.13446 9.21637 28 34 -1.01257 24 42 Plotting coarse grid fields at n= 130 NEST CHECK at time step 135 Max trunc error = 1.9354 bounded by ( 20: 33 , 28: 43); center = ( 26, 35) Old nest saved: X1,X2,Y1,Y2= 8 43 20 55 MOVING nest; N=135 TruncErr center 26 35 nest bounds: X = ( 9: 44), Y = ( 18: 53) Interpolating > coarse to nest w/nest copy; step 135, nestX1,Y1 9 18, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 135, nestX1,Y1 9 18, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap NEST CHECK at time step 140 Max trunc error = 2.0880 bounded by ( 21: 35 , 26: 41); center = ( 28, 33) Old nest saved: X1,X2,Y1,Y2= 9 44 18 53 MOVING nest; N=140 TruncErr center 28 33 nest bounds: X = ( 11: 46), Y = ( 16: 51) Interpolating > coarse to nest w/nest copy; step 140, nestX1,Y1 11 16, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 140, nestX1,Y1 11 16, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap 140 1.22173 9.10463 32 30 -1.04574 27 38 Plotting coarse grid fields at n= 140 NEST CHECK at time step 145 Max trunc error = 2.2006 bounded by ( 23: 37 , 24: 34); center = ( 30, 29) Old nest saved: X1,X2,Y1,Y2= 11 46 16 51 MOVING nest; N=145 TruncErr center 30 29 nest bounds: X = ( 13: 48), Y = ( 12: 47) Interpolating > coarse to nest w/nest copy; step 145, nestX1,Y1 13 12, ratio 3 Dointerp: copying from old nest ( 7:106, 1: 94) to new ( 1:100, 13:106); 83.7% overlap Interpolating > coarse to nest w/nest copy; step 145, nestX1,Y1 13 12, ratio 3 Dointerp: copying from old nest ( 7:106, 1: 94) to new ( 1:100, 13:106); 83.7% overlap NEST CHECK at time step 150 Max trunc error = 2.2552 bounded by ( 26: 39 , 23: 32); center = ( 32, 27) Old nest saved: X1,X2,Y1,Y2= 13 48 12 47 MOVING nest; N=150 TruncErr center 32 27 nest bounds: X = ( 15: 50), Y = ( 10: 45) Interpolating > coarse to nest w/nest copy; step 150, nestX1,Y1 15 10, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 150, nestX1,Y1 15 10, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap 150 1.30900 9.06568 36 27 -1.06819 32 35 Plotting coarse grid fields at n= 150 NEST CHECK at time step 155 Max trunc error = 2.2667 bounded by ( 28: 41 , 22: 31); center = ( 34, 26) Old nest saved: X1,X2,Y1,Y2= 15 50 10 45 MOVING nest; N=155 TruncErr center 34 26 nest bounds: X = ( 17: 52), Y = ( 9: 44) Interpolating > coarse to nest w/nest copy; step 155, nestX1,Y1 17 9, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 155, nestX1,Y1 17 9, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap NEST CHECK at time step 160 Max trunc error = 2.1967 bounded by ( 30: 44 , 20: 29); center = ( 37, 24) Old nest saved: X1,X2,Y1,Y2= 17 52 9 44 MOVING nest; N=160 TruncErr center 37 24 nest bounds: X = ( 20: 55), Y = ( 7: 42) Interpolating > coarse to nest w/nest copy; step 160, nestX1,Y1 20 7, ratio 3 Dointerp: copying from old nest ( 10:106, 1:100) to new ( 1: 97, 7:106); 86.3% overlap Interpolating > coarse to nest w/nest copy; step 160, nestX1,Y1 20 7, ratio 3 Dointerp: copying from old nest ( 10:106, 1:100) to new ( 1: 97, 7:106); 86.3% overlap 160 1.39626 8.85601 41 25 -1.10807 36 32 Plotting coarse grid fields at n= 160 NEST CHECK at time step 165 Max trunc error = 2.2164 bounded by ( 33: 46 , 19: 28); center = ( 39, 23) Old nest saved: X1,X2,Y1,Y2= 20 55 7 42 MOVING nest; N=165 TruncErr center 39 23 nest bounds: X = ( 22: 57), Y = ( 6: 41) Interpolating > coarse to nest w/nest copy; step 165, nestX1,Y1 22 6, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 165, nestX1,Y1 22 6, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap NEST CHECK at time step 170 Max trunc error = 2.1333 bounded by ( 35: 49 , 19: 27); center = ( 42, 23) Old nest saved: X1,X2,Y1,Y2= 22 57 6 41 MOVING nest; N=170 TruncErr center 42 23 nest bounds: X = ( 25: 60), Y = ( 6: 41) Interpolating > coarse to nest w/nest copy; step 170, nestX1,Y1 25 6, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 170, nestX1,Y1 25 6, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap 170 1.48353 8.84699 46 23 -1.12211 41 30 Plotting coarse grid fields at n= 170 NEST CHECK at time step 175 Max trunc error = 2.0853 bounded by ( 37: 51 , 18: 26); center = ( 44, 22) Old nest saved: X1,X2,Y1,Y2= 25 60 6 41 MOVING nest; N=175 TruncErr center 44 22 nest bounds: X = ( 27: 62), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 175, nestX1,Y1 27 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 175, nestX1,Y1 27 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap NEST CHECK at time step 180 Max trunc error = 1.9672 bounded by ( 40: 54 , 18: 26); center = ( 47, 22) Old nest saved: X1,X2,Y1,Y2= 27 62 5 40 MOVING nest; N=180 TruncErr center 47 22 nest bounds: X = ( 30: 65), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 180, nestX1,Y1 30 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 180, nestX1,Y1 30 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap 180 1.57080 8.78546 51 22 -1.18394 43 19 Plotting coarse grid fields at n= 180 NEST CHECK at time step 185 Max trunc error = 1.9541 bounded by ( 42: 57 , 18: 26); center = ( 49, 22) Old nest saved: X1,X2,Y1,Y2= 30 65 5 40 MOVING nest; N=185 TruncErr center 49 22 nest bounds: X = ( 32: 67), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 185, nestX1,Y1 32 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 185, nestX1,Y1 32 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap NEST CHECK at time step 190 Max trunc error = 1.8876 bounded by ( 45: 59 , 18: 26); center = ( 52, 22) Old nest saved: X1,X2,Y1,Y2= 32 67 5 40 MOVING nest; N=190 TruncErr center 52 22 nest bounds: X = ( 35: 70), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 190, nestX1,Y1 35 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 190, nestX1,Y1 35 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap 190 1.65806 8.64849 57 22 -1.22977 49 18 Plotting coarse grid fields at n= 190 NEST CHECK at time step 195 Max trunc error = 1.8094 bounded by ( 47: 62 , 18: 27); center = ( 54, 22) Old nest saved: X1,X2,Y1,Y2= 35 70 5 40 MOVING nest; N=195 TruncErr center 54 22 nest bounds: X = ( 37: 72), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 195, nestX1,Y1 37 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 195, nestX1,Y1 37 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap NEST CHECK at time step 200 Max trunc error = 1.7987 bounded by ( 50: 65 , 19: 27); center = ( 57, 23) Old nest saved: X1,X2,Y1,Y2= 37 72 5 40 MOVING nest; N=200 TruncErr center 57 23 nest bounds: X = ( 40: 75), Y = ( 6: 41) Interpolating > coarse to nest w/nest copy; step 200, nestX1,Y1 40 6, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 200, nestX1,Y1 40 6, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap 200 1.74533 8.63284 62 23 -1.28247 53 21 Plotting coarse grid fields at n= 200 NEST CHECK at time step 205 Max trunc error = 1.7345 bounded by ( 53: 67 , 19: 28); center = ( 60, 23) Old nest saved: X1,X2,Y1,Y2= 40 75 6 41 MOVING nest; N=205 TruncErr center 60 23 nest bounds: X = ( 43: 78), Y = ( 6: 41) Interpolating > coarse to nest w/nest copy; step 205, nestX1,Y1 43 6, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 205, nestX1,Y1 43 6, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap NEST CHECK at time step 210 Max trunc error = 1.7322 bounded by ( 55: 70 , 20: 29); center = ( 62, 24) Old nest saved: X1,X2,Y1,Y2= 43 78 6 41 MOVING nest; N=210 TruncErr center 62 24 nest bounds: X = ( 45: 80), Y = ( 7: 42) Interpolating > coarse to nest w/nest copy; step 210, nestX1,Y1 45 7, ratio 3 Dointerp: copying from old nest ( 7:106, 4:106) to new ( 1:100, 1:103); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 210, nestX1,Y1 45 7, ratio 3 Dointerp: copying from old nest ( 7:106, 4:106) to new ( 1:100, 1:103); 91.7% overlap 210 1.83260 8.56716 67 25 -1.31417 59 21 Plotting coarse grid fields at n= 210 NEST CHECK at time step 215 Max trunc error = 1.6551 bounded by ( 57: 73 , 17: 30); center = ( 65, 23) Old nest saved: X1,X2,Y1,Y2= 45 80 7 42 MOVING nest; N=215 TruncErr center 65 23 nest bounds: X = ( 48: 83), Y = ( 6: 41) Interpolating > coarse to nest w/nest copy; step 215, nestX1,Y1 48 6, ratio 3 Dointerp: copying from old nest ( 10:106, 1:103) to new ( 1: 97, 4:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 215, nestX1,Y1 48 6, ratio 3 Dointerp: copying from old nest ( 10:106, 1:103) to new ( 1: 97, 4:106); 88.9% overlap NEST CHECK at time step 220 Max trunc error = 1.6604 bounded by ( 60: 76 , 18: 31); center = ( 68, 24) Old nest saved: X1,X2,Y1,Y2= 48 83 6 41 MOVING nest; N=220 TruncErr center 68 24 nest bounds: X = ( 51: 86), Y = ( 7: 42) Interpolating > coarse to nest w/nest copy; step 220, nestX1,Y1 51 7, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 220, nestX1,Y1 51 7, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap 220 1.91986 8.42322 72 28 -1.34171 63 24 Plotting coarse grid fields at n= 220 NEST CHECK at time step 225 Max trunc error = 1.7305 bounded by ( 62: 78 , 19: 33); center = ( 70, 26) Old nest saved: X1,X2,Y1,Y2= 51 86 7 42 MOVING nest; N=225 TruncErr center 70 26 nest bounds: X = ( 53: 88), Y = ( 9: 44) Interpolating > coarse to nest w/nest copy; step 225, nestX1,Y1 53 9, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 225, nestX1,Y1 53 9, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap NEST CHECK at time step 230 Max trunc error = 1.8598 bounded by ( 64: 80 , 20: 34); center = ( 72, 27) Old nest saved: X1,X2,Y1,Y2= 53 88 9 44 MOVING nest; N=230 TruncErr center 72 27 nest bounds: X = ( 55: 90), Y = ( 10: 45) Interpolating > coarse to nest w/nest copy; step 230, nestX1,Y1 55 10, ratio 3 Dointerp: copying from old nest ( 7:106, 4:106) to new ( 1:100, 1:103); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 230, nestX1,Y1 55 10, ratio 3 Dointerp: copying from old nest ( 7:106, 4:106) to new ( 1:100, 1:103); 91.7% overlap 230 2.00713 8.31692 76 31 -1.34476 67 29 Plotting coarse grid fields at n= 230 NEST CHECK at time step 235 Max trunc error = 1.9151 bounded by ( 67: 82 , 22: 36); center = ( 74, 29) Old nest saved: X1,X2,Y1,Y2= 55 90 10 45 MOVING nest; N=235 TruncErr center 74 29 nest bounds: X = ( 57: 92), Y = ( 12: 47) Interpolating > coarse to nest w/nest copy; step 235, nestX1,Y1 57 12, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 235, nestX1,Y1 57 12, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap NEST CHECK at time step 240 Max trunc error = 1.9327 bounded by ( 73: 84 , 24: 38); center = ( 78, 31) Old nest saved: X1,X2,Y1,Y2= 57 92 12 47 MOVING nest; N=240 TruncErr center 78 31 nest bounds: X = ( 61: 96), Y = ( 14: 49) Interpolating > coarse to nest w/nest copy; step 240, nestX1,Y1 61 14, ratio 3 Dointerp: copying from old nest ( 13:106, 7:106) to new ( 1: 94, 1:100); 83.7% overlap Interpolating > coarse to nest w/nest copy; step 240, nestX1,Y1 61 14, ratio 3 Dointerp: copying from old nest ( 13:106, 7:106) to new ( 1: 94, 1:100); 83.7% overlap 240 2.09440 8.19357 79 35 -1.39360 70 33 Plotting coarse grid fields at n= 240 NEST CHECK at time step 245 Max trunc error = 1.9184 bounded by ( 75: 85 , 26: 40); center = ( 80, 33) Old nest saved: X1,X2,Y1,Y2= 61 96 14 49 MOVING nest; N=245 TruncErr center 80 33 nest bounds: X = ( 63: 98), Y = ( 16: 51) Interpolating > coarse to nest w/nest copy; step 245, nestX1,Y1 63 16, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 245, nestX1,Y1 63 16, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap NEST CHECK at time step 250 Max trunc error = 1.8558 bounded by ( 77: 86 , 28: 42); center = ( 81, 35) Old nest saved: X1,X2,Y1,Y2= 63 98 16 51 MOVING nest; N=250 TruncErr center 81 35 nest bounds: X = ( 64: 99), Y = ( 18: 53) Interpolating > coarse to nest w/nest copy; step 250, nestX1,Y1 64 18, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 250, nestX1,Y1 64 18, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap 250 2.18166 8.15475 82 40 -1.44594 74 36 Plotting coarse grid fields at n= 250 NEST CHECK at time step 255 Max trunc error = 1.7880 bounded by ( 78: 88 , 31: 45); center = ( 83, 38) Old nest saved: X1,X2,Y1,Y2= 64 99 18 53 MOVING nest; N=255 TruncErr center 83 38 nest bounds: X = ( 66:101), Y = ( 21: 56) Interpolating > coarse to nest w/nest copy; step 255, nestX1,Y1 66 21, ratio 3 Dointerp: copying from old nest ( 7:106, 10:106) to new ( 1:100, 1: 97); 86.3% overlap Interpolating > coarse to nest w/nest copy; step 255, nestX1,Y1 66 21, ratio 3 Dointerp: copying from old nest ( 7:106, 10:106) to new ( 1:100, 1: 97); 86.3% overlap NEST CHECK at time step 260 Max trunc error = 1.7356 bounded by ( 80: 88 , 33: 48); center = ( 84, 40) Old nest saved: X1,X2,Y1,Y2= 66 101 21 56 MOVING nest; N=260 TruncErr center 84 40 nest bounds: X = ( 67:102), Y = ( 23: 58) Interpolating > coarse to nest w/nest copy; step 260, nestX1,Y1 67 23, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 260, nestX1,Y1 67 23, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap 260 2.26893 8.05753 84 45 -1.49719 86 37 Plotting coarse grid fields at n= 260 NEST CHECK at time step 265 Max trunc error = 1.6442 bounded by ( 81: 89 , 35: 50); center = ( 85, 42) Old nest saved: X1,X2,Y1,Y2= 67 102 23 58 MOVING nest; N=265 TruncErr center 85 42 nest bounds: X = ( 68:103), Y = ( 25: 60) Interpolating > coarse to nest w/nest copy; step 265, nestX1,Y1 68 25, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 265, nestX1,Y1 68 25, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap NEST CHECK at time step 270 Max trunc error = 1.5688 bounded by ( 81: 90 , 38: 53); center = ( 85, 45) Old nest saved: X1,X2,Y1,Y2= 68 103 25 60 MOVING nest; N=270 TruncErr center 85 45 nest bounds: X = ( 68:103), Y = ( 28: 63) Interpolating > coarse to nest w/nest copy; step 270, nestX1,Y1 68 28, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 270, nestX1,Y1 68 28, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap 270 2.35619 7.97715 85 51 -1.54476 88 42 Plotting coarse grid fields at n= 270 NEST CHECK at time step 275 Max trunc error = 1.5084 bounded by ( 81: 90 , 40: 56); center = ( 85, 48) Old nest saved: X1,X2,Y1,Y2= 68 103 28 63 MOVING nest; N=275 TruncErr center 85 48 nest bounds: X = ( 68:103), Y = ( 31: 66) Interpolating > coarse to nest w/nest copy; step 275, nestX1,Y1 68 31, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 275, nestX1,Y1 68 31, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap NEST CHECK at time step 280 Max trunc error = 1.4330 bounded by ( 80: 90 , 43: 59); center = ( 85, 51) Old nest saved: X1,X2,Y1,Y2= 68 103 31 66 MOVING nest; N=280 TruncErr center 85 51 nest bounds: X = ( 68:103), Y = ( 34: 69) Interpolating > coarse to nest w/nest copy; step 280, nestX1,Y1 68 34, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 280, nestX1,Y1 68 34, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap 280 2.44346 7.96699 85 56 -1.58380 89 48 Plotting coarse grid fields at n= 280 NEST CHECK at time step 285 Max trunc error = 1.4013 bounded by ( 80: 90 , 46: 61); center = ( 85, 53) Old nest saved: X1,X2,Y1,Y2= 68 103 34 69 MOVING nest; N=285 TruncErr center 85 53 nest bounds: X = ( 68:103), Y = ( 36: 71) Interpolating > coarse to nest w/nest copy; step 285, nestX1,Y1 68 36, ratio 3 Dointerp: copying from old nest ( 1:106, 7:106) to new ( 1:106, 1:100); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 285, nestX1,Y1 68 36, ratio 3 Dointerp: copying from old nest ( 1:106, 7:106) to new ( 1:106, 1:100); 94.3% overlap NEST CHECK at time step 290 Max trunc error = 1.3792 bounded by ( 80: 90 , 48: 64); center = ( 85, 56) Old nest saved: X1,X2,Y1,Y2= 68 103 36 71 MOVING nest; N=290 TruncErr center 85 56 nest bounds: X = ( 68:103), Y = ( 39: 74) Interpolating > coarse to nest w/nest copy; step 290, nestX1,Y1 68 39, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 290, nestX1,Y1 68 39, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap 290 2.53073 7.88552 84 61 -1.57456 89 54 Plotting coarse grid fields at n= 290 NEST CHECK at time step 295 Max trunc error = 1.3427 bounded by ( 79: 89 , 51: 67); center = ( 84, 59) Old nest saved: X1,X2,Y1,Y2= 68 103 39 74 MOVING nest; N=295 TruncErr center 84 59 nest bounds: X = ( 67:102), Y = ( 42: 77) Interpolating > coarse to nest w/nest copy; step 295, nestX1,Y1 67 42, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 295, nestX1,Y1 67 42, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap NEST CHECK at time step 300 Max trunc error = 1.3591 bounded by ( 78: 88 , 53: 70); center = ( 83, 61) Old nest saved: X1,X2,Y1,Y2= 67 102 42 77 MOVING nest; N=300 TruncErr center 83 61 nest bounds: X = ( 66:101), Y = ( 44: 79) Interpolating > coarse to nest w/nest copy; step 300, nestX1,Y1 66 44, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 300, nestX1,Y1 66 44, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap 300 2.61799 7.77266 82 67 -1.56063 89 60 Plotting coarse grid fields at n= 300 NEST CHECK at time step 305 Max trunc error = 1.3274 bounded by ( 77: 91 , 56: 73); center = ( 84, 64) Old nest saved: X1,X2,Y1,Y2= 66 101 44 79 MOVING nest; N=305 TruncErr center 84 64 nest bounds: X = ( 67:102), Y = ( 47: 82) Interpolating > coarse to nest w/nest copy; step 305, nestX1,Y1 67 47, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 305, nestX1,Y1 67 47, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap NEST CHECK at time step 310 Max trunc error = 1.3778 bounded by ( 76: 91 , 58: 75); center = ( 83, 66) Old nest saved: X1,X2,Y1,Y2= 67 102 47 82 MOVING nest; N=310 TruncErr center 83 66 nest bounds: X = ( 66:101), Y = ( 49: 84) Interpolating > coarse to nest w/nest copy; step 310, nestX1,Y1 66 49, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 310, nestX1,Y1 66 49, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap 310 2.70526 7.75109 80 71 -1.55740 87 66 Plotting coarse grid fields at n= 310 NEST CHECK at time step 315 Max trunc error = 1.4890 bounded by ( 75: 89 , 61: 78); center = ( 82, 69) Old nest saved: X1,X2,Y1,Y2= 66 101 49 84 MOVING nest; N=315 TruncErr center 82 69 nest bounds: X = ( 65:100), Y = ( 52: 87) Interpolating > coarse to nest w/nest copy; step 315, nestX1,Y1 65 52, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 315, nestX1,Y1 65 52, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap NEST CHECK at time step 320 Max trunc error = 1.5884 bounded by ( 74: 88 , 63: 80); center = ( 81, 71) Old nest saved: X1,X2,Y1,Y2= 65 100 52 87 MOVING nest; N=320 TruncErr center 81 71 nest bounds: X = ( 64: 99), Y = ( 54: 89) Interpolating > coarse to nest w/nest copy; step 320, nestX1,Y1 64 54, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 320, nestX1,Y1 64 54, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap 320 2.79253 7.59339 76 76 -1.60696 77 66 Plotting coarse grid fields at n= 320 NEST CHECK at time step 325 Max trunc error = 1.6169 bounded by ( 72: 86 , 65: 82); center = ( 79, 73) Old nest saved: X1,X2,Y1,Y2= 64 99 54 89 MOVING nest; N=325 TruncErr center 79 73 nest bounds: X = ( 62: 97), Y = ( 56: 91) Interpolating > coarse to nest w/nest copy; step 325, nestX1,Y1 62 56, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 325, nestX1,Y1 62 56, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap NEST CHECK at time step 330 Max trunc error = 1.6121 bounded by ( 70: 85 , 67: 84); center = ( 77, 75) Old nest saved: X1,X2,Y1,Y2= 62 97 56 91 MOVING nest; N=330 TruncErr center 77 75 nest bounds: X = ( 60: 95), Y = ( 58: 93) Interpolating > coarse to nest w/nest copy; step 330, nestX1,Y1 60 58, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 330, nestX1,Y1 60 58, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap 330 2.87979 7.56620 72 79 -1.65244 75 70 Plotting coarse grid fields at n= 330 NEST CHECK at time step 335 Max trunc error = 1.5983 bounded by ( 68: 83 , 69: 85); center = ( 75, 77) Old nest saved: X1,X2,Y1,Y2= 60 95 58 93 MOVING nest; N=335 TruncErr center 75 77 nest bounds: X = ( 58: 93), Y = ( 60: 95) Interpolating > coarse to nest w/nest copy; step 335, nestX1,Y1 58 60, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 335, nestX1,Y1 58 60, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap NEST CHECK at time step 340 Max trunc error = 1.5639 bounded by ( 66: 81 , 70: 87); center = ( 73, 78) Old nest saved: X1,X2,Y1,Y2= 58 93 60 95 MOVING nest; N=340 TruncErr center 73 78 nest bounds: X = ( 56: 91), Y = ( 61: 96) Interpolating > coarse to nest w/nest copy; step 340, nestX1,Y1 56 61, ratio 3 Dointerp: copying from old nest ( 1:100, 4:106) to new ( 7:106, 1:103); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 340, nestX1,Y1 56 61, ratio 3 Dointerp: copying from old nest ( 1:100, 4:106) to new ( 7:106, 1:103); 91.7% overlap 340 2.96706 7.47419 68 82 -1.69445 77 82 Plotting coarse grid fields at n= 340 NEST CHECK at time step 345 Max trunc error = 1.4900 bounded by ( 66: 78 , 72: 88); center = ( 72, 80) Old nest saved: X1,X2,Y1,Y2= 56 91 61 96 MOVING nest; N=345 TruncErr center 72 80 nest bounds: X = ( 55: 90), Y = ( 63: 98) Interpolating > coarse to nest w/nest copy; step 345, nestX1,Y1 55 63, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 345, nestX1,Y1 55 63, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap NEST CHECK at time step 350 Max trunc error = 1.4122 bounded by ( 61: 80 , 78: 89); center = ( 70, 83) Old nest saved: X1,X2,Y1,Y2= 55 90 63 98 MOVING nest; N=350 TruncErr center 70 83 nest bounds: X = ( 53: 88), Y = ( 66:101) Interpolating > coarse to nest w/nest copy; step 350, nestX1,Y1 53 66, ratio 3 Dointerp: copying from old nest ( 1:100, 10:106) to new ( 7:106, 1: 97); 86.3% overlap Interpolating > coarse to nest w/nest copy; step 350, nestX1,Y1 53 66, ratio 3 Dointerp: copying from old nest ( 1:100, 10:106) to new ( 7:106, 1: 97); 86.3% overlap 350 3.05433 7.39480 63 84 -1.73560 72 85 Plotting coarse grid fields at n= 350 NEST CHECK at time step 355 Max trunc error = 1.3292 bounded by ( 58: 78 , 80: 90); center = ( 68, 85) Old nest saved: X1,X2,Y1,Y2= 53 88 66 101 MOVING nest; N=355 TruncErr center 68 85 nest bounds: X = ( 51: 86), Y = ( 68:103) Interpolating > coarse to nest w/nest copy; step 355, nestX1,Y1 51 68, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 355, nestX1,Y1 51 68, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap NEST CHECK at time step 360 Max trunc error = 1.2614 bounded by ( 55: 75 , 80: 91); center = ( 65, 85) Old nest saved: X1,X2,Y1,Y2= 51 86 68 103 MOVING nest; N=360 TruncErr center 65 85 nest bounds: X = ( 48: 83), Y = ( 68:103) Interpolating > coarse to nest w/nest copy; step 360, nestX1,Y1 48 68, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:106) to new ( 10:106, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 360, nestX1,Y1 48 68, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:106) to new ( 10:106, 1:106); 91.5% overlap 360 3.14159 7.36843 57 85 -1.78390 66 88 Plotting coarse grid fields at n= 360 Plotting smax Plotting error field Error plotted. Grid 1 errors: max corr 0.7805 error: tot 0.12241 dissip 0.00143 disper 0.12099 Interpolating > coarse to nest; step 361, nestX1,Y1 48 68, ratio 3 Grid 2 errors: max corr 0.9813 error: tot 0.09007 dissip 0.00086 disper 0.08930