reading in data... ATMS 502/CSE 566 - Program 4, Fall 2013 Case 1, domain (106,106), cone type=1, radius=0.08, origin ( 0.00, 0.30), (*****,-0.30) Nest refinement 3:1, check every 5 steps Time step 0.008727, # of steps 360 Time steps to be plotted: -10 Method: 2nd-order Crowley Nest feedback to coarse grid is ON. Time interpolation of nest borders is OFF. Step Time Max at I , J Min at I , J --------------------------------------------------- 0 0.00000 9.90086 53 85 0.00000 1 1 INITIAL NEST at time step 1 Max trunc error = 2.3406 bounded by ( 45: 62 , 80: 90); center = ( 53, 85) PLACING nest; N= 1 TruncErr center 53 85 nest bounds: X = ( 36: 71), Y = ( 68:103) Interpolating > coarse to nest; step 1, nestX1,Y1 36 68, ratio 3 Interpolating > coarse to nest; step 1, nestX1,Y1 36 68, ratio 3 time_interp F Feedback from nest to coarse grid. Interpolating > nest to coarse; step 1, nestX1,Y1 36 68, ratio 3 1 0.00873 9.92718 53 85 -0.01542 61 83 Interpolating > nest to coarse; step 2, nestX1,Y1 36 68, ratio 3 2 0.01745 9.87591 52 85 -0.00820 48 92 Interpolating > nest to coarse; step 3, nestX1,Y1 36 68, ratio 3 3 0.02618 9.93417 52 85 -0.02325 60 84 Interpolating > nest to coarse; step 4, nestX1,Y1 36 68, ratio 3 4 0.03491 9.89707 51 85 -0.01658 47 92 NEST CHECK at time step 5 Max trunc error = 2.2867 bounded by ( 43: 60 , 80: 90); center = ( 51, 85) Old nest saved: X1,X2,Y1,Y2= 36 71 68 103 MOVING nest; N= 5 TruncErr center 51 85 nest bounds: X = ( 34: 69), Y = ( 68:103) Interpolating > coarse to nest w/nest copy; step 5, nestX1,Y1 34 68, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 5, nestX1,Y1 34 68, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap Interpolating > nest to coarse; step 5, nestX1,Y1 34 68, ratio 3 5 0.04363 9.90939 51 85 -0.02636 59 84 Interpolating > nest to coarse; step 6, nestX1,Y1 34 68, ratio 3 6 0.05236 9.90018 50 85 -0.02234 58 87 Interpolating > nest to coarse; step 7, nestX1,Y1 34 68, ratio 3 7 0.06109 9.86447 50 85 -0.03351 58 85 Interpolating > nest to coarse; step 8, nestX1,Y1 34 68, ratio 3 8 0.06981 9.87158 49 85 -0.03426 57 87 Interpolating > nest to coarse; step 9, nestX1,Y1 34 68, ratio 3 9 0.07854 9.78646 49 85 -0.03960 57 85 NEST CHECK at time step 10 Max trunc error = 2.3474 bounded by ( 40: 57 , 80: 90); center = ( 48, 85) Old nest saved: X1,X2,Y1,Y2= 34 69 68 103 MOVING nest; N= 10 TruncErr center 48 85 nest bounds: X = ( 31: 66), Y = ( 68:103) Interpolating > coarse to nest w/nest copy; step 10, nestX1,Y1 31 68, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:106) to new ( 10:106, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 10, nestX1,Y1 31 68, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:106) to new ( 10:106, 1:106); 91.5% overlap Interpolating > nest to coarse; step 10, nestX1,Y1 31 68, ratio 3 10 0.08727 9.80016 48 85 -0.04184 56 87 Plotting coarse + nested grids at n= 10 Interpolating > nest to coarse; step 11, nestX1,Y1 31 68, ratio 3 Interpolating > nest to coarse; step 12, nestX1,Y1 31 68, ratio 3 Interpolating > nest to coarse; step 13, nestX1,Y1 31 68, ratio 3 Interpolating > nest to coarse; step 14, nestX1,Y1 31 68, ratio 3 NEST CHECK at time step 15 Max trunc error = 2.3526 bounded by ( 38: 55 , 79: 89); center = ( 46, 84) Old nest saved: X1,X2,Y1,Y2= 31 66 68 103 MOVING nest; N= 15 TruncErr center 46 84 nest bounds: X = ( 29: 64), Y = ( 67:102) Interpolating > coarse to nest w/nest copy; step 15, nestX1,Y1 29 67, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 15, nestX1,Y1 29 67, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > nest to coarse; step 15, nestX1,Y1 29 67, ratio 3 Interpolating > nest to coarse; step 16, nestX1,Y1 29 67, ratio 3 Interpolating > nest to coarse; step 17, nestX1,Y1 29 67, ratio 3 Interpolating > nest to coarse; step 18, nestX1,Y1 29 67, ratio 3 Interpolating > nest to coarse; step 19, nestX1,Y1 29 67, ratio 3 NEST CHECK at time step 20 Max trunc error = 2.1572 bounded by ( 35: 52 , 76: 91); center = ( 43, 83) Old nest saved: X1,X2,Y1,Y2= 29 64 67 102 MOVING nest; N= 20 TruncErr center 43 83 nest bounds: X = ( 26: 61), Y = ( 66:101) Interpolating > coarse to nest w/nest copy; step 20, nestX1,Y1 26 66, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:103) to new ( 10:106, 4:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 20, nestX1,Y1 26 66, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:103) to new ( 10:106, 4:106); 88.9% overlap Interpolating > nest to coarse; step 20, nestX1,Y1 26 66, ratio 3 20 0.17453 9.86183 43 83 -0.07591 51 84 Plotting coarse + nested grids at n= 20 Interpolating > nest to coarse; step 21, nestX1,Y1 26 66, ratio 3 Interpolating > nest to coarse; step 22, nestX1,Y1 26 66, ratio 3 Interpolating > nest to coarse; step 23, nestX1,Y1 26 66, ratio 3 Interpolating > nest to coarse; step 24, nestX1,Y1 26 66, ratio 3 NEST CHECK at time step 25 Max trunc error = 2.2867 bounded by ( 32: 50 , 74: 90); center = ( 41, 82) Old nest saved: X1,X2,Y1,Y2= 26 61 66 101 MOVING nest; N= 25 TruncErr center 41 82 nest bounds: X = ( 24: 59), Y = ( 65:100) Interpolating > coarse to nest w/nest copy; step 25, nestX1,Y1 24 65, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 25, nestX1,Y1 24 65, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > nest to coarse; step 25, nestX1,Y1 24 65, ratio 3 Interpolating > nest to coarse; step 26, nestX1,Y1 24 65, ratio 3 Interpolating > nest to coarse; step 27, nestX1,Y1 24 65, ratio 3 Interpolating > nest to coarse; step 28, nestX1,Y1 24 65, ratio 3 Interpolating > nest to coarse; step 29, nestX1,Y1 24 65, ratio 3 NEST CHECK at time step 30 Max trunc error = 2.2244 bounded by ( 30: 47 , 73: 89); center = ( 38, 81) Old nest saved: X1,X2,Y1,Y2= 24 59 65 100 MOVING nest; N= 30 TruncErr center 38 81 nest bounds: X = ( 21: 56), Y = ( 64: 99) Interpolating > coarse to nest w/nest copy; step 30, nestX1,Y1 21 64, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:103) to new ( 10:106, 4:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 30, nestX1,Y1 21 64, ratio 3 Dointerp: copying from old nest ( 1: 97, 1:103) to new ( 10:106, 4:106); 88.9% overlap Interpolating > nest to coarse; step 30, nestX1,Y1 21 64, ratio 3 30 0.26180 9.83384 38 81 -0.10039 46 83 Plotting coarse + nested grids at n= 30 Interpolating > nest to coarse; step 31, nestX1,Y1 21 64, ratio 3 Interpolating > nest to coarse; step 32, nestX1,Y1 21 64, ratio 3 Interpolating > nest to coarse; step 33, nestX1,Y1 21 64, ratio 3 Interpolating > nest to coarse; step 34, nestX1,Y1 21 64, ratio 3 NEST CHECK at time step 35 Max trunc error = 2.2888 bounded by ( 28: 45 , 72: 88); center = ( 36, 80) Old nest saved: X1,X2,Y1,Y2= 21 56 64 99 MOVING nest; N= 35 TruncErr center 36 80 nest bounds: X = ( 19: 54), Y = ( 63: 98) Interpolating > coarse to nest w/nest copy; step 35, nestX1,Y1 19 63, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 35, nestX1,Y1 19 63, ratio 3 Dointerp: copying from old nest ( 1:100, 1:103) to new ( 7:106, 4:106); 91.7% overlap Interpolating > nest to coarse; step 35, nestX1,Y1 19 63, ratio 3 Interpolating > nest to coarse; step 36, nestX1,Y1 19 63, ratio 3 Interpolating > nest to coarse; step 37, nestX1,Y1 19 63, ratio 3 Interpolating > nest to coarse; step 38, nestX1,Y1 19 63, ratio 3 Interpolating > nest to coarse; step 39, nestX1,Y1 19 63, ratio 3 NEST CHECK at time step 40 Max trunc error = 2.2775 bounded by ( 26: 43 , 70: 87); center = ( 34, 78) Old nest saved: X1,X2,Y1,Y2= 19 54 63 98 MOVING nest; N= 40 TruncErr center 34 78 nest bounds: X = ( 17: 52), Y = ( 61: 96) Interpolating > coarse to nest w/nest copy; step 40, nestX1,Y1 17 61, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 40, nestX1,Y1 17 61, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > nest to coarse; step 40, nestX1,Y1 17 61, ratio 3 40 0.34907 9.78443 33 78 -0.12665 41 81 Plotting coarse + nested grids at n= 40 Interpolating > nest to coarse; step 41, nestX1,Y1 17 61, ratio 3 Interpolating > nest to coarse; step 42, nestX1,Y1 17 61, ratio 3 Interpolating > nest to coarse; step 43, nestX1,Y1 17 61, ratio 3 Interpolating > nest to coarse; step 44, nestX1,Y1 17 61, ratio 3 NEST CHECK at time step 45 Max trunc error = 2.1973 bounded by ( 24: 41 , 68: 85); center = ( 32, 76) Old nest saved: X1,X2,Y1,Y2= 17 52 61 96 MOVING nest; N= 45 TruncErr center 32 76 nest bounds: X = ( 15: 50), Y = ( 59: 94) Interpolating > coarse to nest w/nest copy; step 45, nestX1,Y1 15 59, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 45, nestX1,Y1 15 59, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > nest to coarse; step 45, nestX1,Y1 15 59, ratio 3 Interpolating > nest to coarse; step 46, nestX1,Y1 15 59, ratio 3 Interpolating > nest to coarse; step 47, nestX1,Y1 15 59, ratio 3 Interpolating > nest to coarse; step 48, nestX1,Y1 15 59, ratio 3 Interpolating > nest to coarse; step 49, nestX1,Y1 15 59, ratio 3 NEST CHECK at time step 50 Max trunc error = 2.3175 bounded by ( 22: 39 , 66: 83); center = ( 30, 74) Old nest saved: X1,X2,Y1,Y2= 15 50 59 94 MOVING nest; N= 50 TruncErr center 30 74 nest bounds: X = ( 13: 48), Y = ( 57: 92) Interpolating > coarse to nest w/nest copy; step 50, nestX1,Y1 13 57, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 50, nestX1,Y1 13 57, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > nest to coarse; step 50, nestX1,Y1 13 57, ratio 3 50 0.43633 9.78275 29 74 -0.13655 36 79 Plotting coarse + nested grids at n= 50 Interpolating > nest to coarse; step 51, nestX1,Y1 13 57, ratio 3 Interpolating > nest to coarse; step 52, nestX1,Y1 13 57, ratio 3 Interpolating > nest to coarse; step 53, nestX1,Y1 13 57, ratio 3 Interpolating > nest to coarse; step 54, nestX1,Y1 13 57, ratio 3 NEST CHECK at time step 55 Max trunc error = 2.4896 bounded by ( 20: 37 , 64: 81); center = ( 28, 72) Old nest saved: X1,X2,Y1,Y2= 13 48 57 92 MOVING nest; N= 55 TruncErr center 28 72 nest bounds: X = ( 11: 46), Y = ( 55: 90) Interpolating > coarse to nest w/nest copy; step 55, nestX1,Y1 11 55, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 55, nestX1,Y1 11 55, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > nest to coarse; step 55, nestX1,Y1 11 55, ratio 3 Interpolating > nest to coarse; step 56, nestX1,Y1 11 55, ratio 3 Interpolating > nest to coarse; step 57, nestX1,Y1 11 55, ratio 3 Interpolating > nest to coarse; step 58, nestX1,Y1 11 55, ratio 3 Interpolating > nest to coarse; step 59, nestX1,Y1 11 55, ratio 3 NEST CHECK at time step 60 Max trunc error = 2.7211 bounded by ( 19: 35 , 62: 79); center = ( 27, 70) Old nest saved: X1,X2,Y1,Y2= 11 46 55 90 MOVING nest; N= 60 TruncErr center 27 70 nest bounds: X = ( 10: 45), Y = ( 53: 88) Interpolating > coarse to nest w/nest copy; step 60, nestX1,Y1 10 53, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 60, nestX1,Y1 10 53, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap Interpolating > nest to coarse; step 60, nestX1,Y1 10 53, ratio 3 60 0.52360 9.82755 26 69 -0.14456 33 74 Plotting coarse + nested grids at n= 60 Interpolating > nest to coarse; step 61, nestX1,Y1 10 53, ratio 3 Interpolating > nest to coarse; step 62, nestX1,Y1 10 53, ratio 3 Interpolating > nest to coarse; step 63, nestX1,Y1 10 53, ratio 3 Interpolating > nest to coarse; step 64, nestX1,Y1 10 53, ratio 3 NEST CHECK at time step 65 Max trunc error = 2.7998 bounded by ( 21: 30 , 60: 76); center = ( 25, 68) Old nest saved: X1,X2,Y1,Y2= 10 45 53 88 MOVING nest; N= 65 TruncErr center 25 68 nest bounds: X = ( 8: 43), Y = ( 51: 86) Interpolating > coarse to nest w/nest copy; step 65, nestX1,Y1 8 51, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 65, nestX1,Y1 8 51, ratio 3 Dointerp: copying from old nest ( 1:100, 1:100) to new ( 7:106, 7:106); 89.0% overlap Interpolating > nest to coarse; step 65, nestX1,Y1 8 51, ratio 3 Interpolating > nest to coarse; step 66, nestX1,Y1 8 51, ratio 3 Interpolating > nest to coarse; step 67, nestX1,Y1 8 51, ratio 3 Interpolating > nest to coarse; step 68, nestX1,Y1 8 51, ratio 3 Interpolating > nest to coarse; step 69, nestX1,Y1 8 51, ratio 3 NEST CHECK at time step 70 Max trunc error = 2.7835 bounded by ( 20: 29 , 57: 74); center = ( 24, 65) Old nest saved: X1,X2,Y1,Y2= 8 43 51 86 MOVING nest; N= 70 TruncErr center 24 65 nest bounds: X = ( 7: 42), Y = ( 48: 83) Interpolating > coarse to nest w/nest copy; step 70, nestX1,Y1 7 48, ratio 3 Dointerp: copying from old nest ( 1:103, 1: 97) to new ( 4:106, 10:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 70, nestX1,Y1 7 48, ratio 3 Dointerp: copying from old nest ( 1:103, 1: 97) to new ( 4:106, 10:106); 88.9% overlap Interpolating > nest to coarse; step 70, nestX1,Y1 7 48, ratio 3 70 0.61087 9.84596 24 64 -0.15825 31 69 Plotting coarse + nested grids at n= 70 Interpolating > nest to coarse; step 71, nestX1,Y1 7 48, ratio 3 Interpolating > nest to coarse; step 72, nestX1,Y1 7 48, ratio 3 Interpolating > nest to coarse; step 73, nestX1,Y1 7 48, ratio 3 Interpolating > nest to coarse; step 74, nestX1,Y1 7 48, ratio 3 NEST CHECK at time step 75 Max trunc error = 2.9195 bounded by ( 19: 27 , 55: 71); center = ( 23, 63) Old nest saved: X1,X2,Y1,Y2= 7 42 48 83 MOVING nest; N= 75 TruncErr center 23 63 nest bounds: X = ( 6: 41), Y = ( 46: 81) Interpolating > coarse to nest w/nest copy; step 75, nestX1,Y1 6 46, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 75, nestX1,Y1 6 46, ratio 3 Dointerp: copying from old nest ( 1:103, 1:100) to new ( 4:106, 7:106); 91.7% overlap Interpolating > nest to coarse; step 75, nestX1,Y1 6 46, ratio 3 Interpolating > nest to coarse; step 76, nestX1,Y1 6 46, ratio 3 Interpolating > nest to coarse; step 77, nestX1,Y1 6 46, ratio 3 Interpolating > nest to coarse; step 78, nestX1,Y1 6 46, ratio 3 Interpolating > nest to coarse; step 79, nestX1,Y1 6 46, ratio 3 NEST CHECK at time step 80 Max trunc error = 2.9399 bounded by ( 18: 27 , 52: 69); center = ( 22, 60) Old nest saved: X1,X2,Y1,Y2= 6 41 46 81 MOVING nest; N= 80 TruncErr center 22 60 nest bounds: X = ( 5: 40), Y = ( 43: 78) Interpolating > coarse to nest w/nest copy; step 80, nestX1,Y1 5 43, ratio 3 Dointerp: copying from old nest ( 1:103, 1: 97) to new ( 4:106, 10:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 80, nestX1,Y1 5 43, ratio 3 Dointerp: copying from old nest ( 1:103, 1: 97) to new ( 4:106, 10:106); 88.9% overlap Interpolating > nest to coarse; step 80, nestX1,Y1 5 43, ratio 3 80 0.69813 9.78085 22 59 -0.16602 25 67 Plotting coarse + nested grids at n= 80 Interpolating > nest to coarse; step 81, nestX1,Y1 5 43, ratio 3 Interpolating > nest to coarse; step 82, nestX1,Y1 5 43, ratio 3 Interpolating > nest to coarse; step 83, nestX1,Y1 5 43, ratio 3 Interpolating > nest to coarse; step 84, nestX1,Y1 5 43, ratio 3 NEST CHECK at time step 85 Max trunc error = 2.8227 bounded by ( 18: 26 , 49: 66); center = ( 22, 57) Old nest saved: X1,X2,Y1,Y2= 5 40 43 78 MOVING nest; N= 85 TruncErr center 22 57 nest bounds: X = ( 5: 40), Y = ( 40: 75) Interpolating > coarse to nest w/nest copy; step 85, nestX1,Y1 5 40, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 85, nestX1,Y1 5 40, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap Interpolating > nest to coarse; step 85, nestX1,Y1 5 40, ratio 3 Interpolating > nest to coarse; step 86, nestX1,Y1 5 40, ratio 3 Interpolating > nest to coarse; step 87, nestX1,Y1 5 40, ratio 3 Interpolating > nest to coarse; step 88, nestX1,Y1 5 40, ratio 3 Interpolating > nest to coarse; step 89, nestX1,Y1 5 40, ratio 3 NEST CHECK at time step 90 Max trunc error = 3.0283 bounded by ( 18: 26 , 49: 63); center = ( 22, 56) Old nest saved: X1,X2,Y1,Y2= 5 40 40 75 MOVING nest; N= 90 TruncErr center 22 56 nest bounds: X = ( 5: 40), Y = ( 39: 74) Interpolating > coarse to nest w/nest copy; step 90, nestX1,Y1 5 39, ratio 3 Dointerp: copying from old nest ( 1:106, 1:103) to new ( 1:106, 4:106); 97.2% overlap Interpolating > coarse to nest w/nest copy; step 90, nestX1,Y1 5 39, ratio 3 Dointerp: copying from old nest ( 1:106, 1:103) to new ( 1:106, 4:106); 97.2% overlap Interpolating > nest to coarse; step 90, nestX1,Y1 5 39, ratio 3 90 0.78540 9.78637 22 54 -0.18706 23 62 Plotting coarse + nested grids at n= 90 Interpolating > nest to coarse; step 91, nestX1,Y1 5 39, ratio 3 Interpolating > nest to coarse; step 92, nestX1,Y1 5 39, ratio 3 Interpolating > nest to coarse; step 93, nestX1,Y1 5 39, ratio 3 Interpolating > nest to coarse; step 94, nestX1,Y1 5 39, ratio 3 NEST CHECK at time step 95 Max trunc error = 3.0079 bounded by ( 18: 26 , 44: 60); center = ( 22, 52) Old nest saved: X1,X2,Y1,Y2= 5 40 39 74 MOVING nest; N= 95 TruncErr center 22 52 nest bounds: X = ( 5: 40), Y = ( 35: 70) Interpolating > coarse to nest w/nest copy; step 95, nestX1,Y1 5 35, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 94) to new ( 1:106, 13:106); 88.7% overlap Interpolating > coarse to nest w/nest copy; step 95, nestX1,Y1 5 35, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 94) to new ( 1:106, 13:106); 88.7% overlap Interpolating > nest to coarse; step 95, nestX1,Y1 5 35, ratio 3 Interpolating > nest to coarse; step 96, nestX1,Y1 5 35, ratio 3 Interpolating > nest to coarse; step 97, nestX1,Y1 5 35, ratio 3 Interpolating > nest to coarse; step 98, nestX1,Y1 5 35, ratio 3 Interpolating > nest to coarse; step 99, nestX1,Y1 5 35, ratio 3 NEST CHECK at time step 100 Max trunc error = 2.8303 bounded by ( 18: 26 , 41: 58); center = ( 22, 49) Old nest saved: X1,X2,Y1,Y2= 5 40 35 70 MOVING nest; N=100 TruncErr center 22 49 nest bounds: X = ( 5: 40), Y = ( 32: 67) Interpolating > coarse to nest w/nest copy; step 100, nestX1,Y1 5 32, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 100, nestX1,Y1 5 32, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap Interpolating > nest to coarse; step 100, nestX1,Y1 5 32, ratio 3 100 0.87266 9.78956 22 48 -0.19727 20 56 Plotting coarse + nested grids at n= 100 Interpolating > nest to coarse; step 101, nestX1,Y1 5 32, ratio 3 Interpolating > nest to coarse; step 102, nestX1,Y1 5 32, ratio 3 Interpolating > nest to coarse; step 103, nestX1,Y1 5 32, ratio 3 Interpolating > nest to coarse; step 104, nestX1,Y1 5 32, ratio 3 NEST CHECK at time step 105 Max trunc error = 3.0092 bounded by ( 19: 27 , 41: 55); center = ( 23, 48) Old nest saved: X1,X2,Y1,Y2= 5 40 32 67 MOVING nest; N=105 TruncErr center 23 48 nest bounds: X = ( 6: 41), Y = ( 31: 66) Interpolating > coarse to nest w/nest copy; step 105, nestX1,Y1 6 31, ratio 3 Dointerp: copying from old nest ( 4:106, 1:103) to new ( 1:103, 4:106); 94.4% overlap Interpolating > coarse to nest w/nest copy; step 105, nestX1,Y1 6 31, ratio 3 Dointerp: copying from old nest ( 4:106, 1:103) to new ( 1:103, 4:106); 94.4% overlap Interpolating > nest to coarse; step 105, nestX1,Y1 6 31, ratio 3 Interpolating > nest to coarse; step 106, nestX1,Y1 6 31, ratio 3 Interpolating > nest to coarse; step 107, nestX1,Y1 6 31, ratio 3 Interpolating > nest to coarse; step 108, nestX1,Y1 6 31, ratio 3 Interpolating > nest to coarse; step 109, nestX1,Y1 6 31, ratio 3 NEST CHECK at time step 110 Max trunc error = 2.8951 bounded by ( 19: 27 , 39: 52); center = ( 23, 45) Old nest saved: X1,X2,Y1,Y2= 6 41 31 66 MOVING nest; N=110 TruncErr center 23 45 nest bounds: X = ( 6: 41), Y = ( 28: 63) Interpolating > coarse to nest w/nest copy; step 110, nestX1,Y1 6 28, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 110, nestX1,Y1 6 28, ratio 3 Dointerp: copying from old nest ( 1:106, 1: 97) to new ( 1:106, 10:106); 91.5% overlap Interpolating > nest to coarse; step 110, nestX1,Y1 6 28, ratio 3 110 0.95993 9.84169 24 43 -0.22579 22 51 Plotting coarse + nested grids at n= 110 Interpolating > nest to coarse; step 111, nestX1,Y1 6 28, ratio 3 Interpolating > nest to coarse; step 112, nestX1,Y1 6 28, ratio 3 Interpolating > nest to coarse; step 113, nestX1,Y1 6 28, ratio 3 Interpolating > nest to coarse; step 114, nestX1,Y1 6 28, ratio 3 NEST CHECK at time step 115 Max trunc error = 2.9059 bounded by ( 20: 29 , 36: 50); center = ( 24, 43) Old nest saved: X1,X2,Y1,Y2= 6 41 28 63 MOVING nest; N=115 TruncErr center 24 43 nest bounds: X = ( 7: 42), Y = ( 26: 61) Interpolating > coarse to nest w/nest copy; step 115, nestX1,Y1 7 26, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 115, nestX1,Y1 7 26, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap Interpolating > nest to coarse; step 115, nestX1,Y1 7 26, ratio 3 Interpolating > nest to coarse; step 116, nestX1,Y1 7 26, ratio 3 Interpolating > nest to coarse; step 117, nestX1,Y1 7 26, ratio 3 Interpolating > nest to coarse; step 118, nestX1,Y1 7 26, ratio 3 Interpolating > nest to coarse; step 119, nestX1,Y1 7 26, ratio 3 NEST CHECK at time step 120 Max trunc error = 2.7860 bounded by ( 18: 31 , 34: 48); center = ( 24, 41) Old nest saved: X1,X2,Y1,Y2= 7 42 26 61 MOVING nest; N=120 TruncErr center 24 41 nest bounds: X = ( 7: 42), Y = ( 24: 59) Interpolating > coarse to nest w/nest copy; step 120, nestX1,Y1 7 24, ratio 3 Dointerp: copying from old nest ( 1:106, 1:100) to new ( 1:106, 7:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 120, nestX1,Y1 7 24, ratio 3 Dointerp: copying from old nest ( 1:106, 1:100) to new ( 1:106, 7:106); 94.3% overlap Interpolating > nest to coarse; step 120, nestX1,Y1 7 24, ratio 3 120 1.04720 9.84315 26 38 -0.24174 24 46 Plotting coarse + nested grids at n= 120 Interpolating > nest to coarse; step 121, nestX1,Y1 7 24, ratio 3 Interpolating > nest to coarse; step 122, nestX1,Y1 7 24, ratio 3 Interpolating > nest to coarse; step 123, nestX1,Y1 7 24, ratio 3 Interpolating > nest to coarse; step 124, nestX1,Y1 7 24, ratio 3 NEST CHECK at time step 125 Max trunc error = 2.8249 bounded by ( 19: 32 , 31: 45); center = ( 25, 38) Old nest saved: X1,X2,Y1,Y2= 7 42 24 59 MOVING nest; N=125 TruncErr center 25 38 nest bounds: X = ( 8: 43), Y = ( 21: 56) Interpolating > coarse to nest w/nest copy; step 125, nestX1,Y1 8 21, ratio 3 Dointerp: copying from old nest ( 4:106, 1: 97) to new ( 1:103, 10:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 125, nestX1,Y1 8 21, ratio 3 Dointerp: copying from old nest ( 4:106, 1: 97) to new ( 1:103, 10:106); 88.9% overlap Interpolating > nest to coarse; step 125, nestX1,Y1 8 21, ratio 3 Interpolating > nest to coarse; step 126, nestX1,Y1 8 21, ratio 3 Interpolating > nest to coarse; step 127, nestX1,Y1 8 21, ratio 3 Interpolating > nest to coarse; step 128, nestX1,Y1 8 21, ratio 3 Interpolating > nest to coarse; step 129, nestX1,Y1 8 21, ratio 3 NEST CHECK at time step 130 Max trunc error = 2.6859 bounded by ( 20: 34 , 29: 43); center = ( 27, 36) Old nest saved: X1,X2,Y1,Y2= 8 43 21 56 MOVING nest; N=130 TruncErr center 27 36 nest bounds: X = ( 10: 45), Y = ( 19: 54) Interpolating > coarse to nest w/nest copy; step 130, nestX1,Y1 10 19, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 130, nestX1,Y1 10 19, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > nest to coarse; step 130, nestX1,Y1 10 19, ratio 3 130 1.13446 9.79088 29 33 -0.24895 26 41 Plotting coarse + nested grids at n= 130 Interpolating > nest to coarse; step 131, nestX1,Y1 10 19, ratio 3 Interpolating > nest to coarse; step 132, nestX1,Y1 10 19, ratio 3 Interpolating > nest to coarse; step 133, nestX1,Y1 10 19, ratio 3 Interpolating > nest to coarse; step 134, nestX1,Y1 10 19, ratio 3 NEST CHECK at time step 135 Max trunc error = 2.6220 bounded by ( 22: 35 , 27: 41); center = ( 28, 34) Old nest saved: X1,X2,Y1,Y2= 10 45 19 54 MOVING nest; N=135 TruncErr center 28 34 nest bounds: X = ( 11: 46), Y = ( 17: 52) Interpolating > coarse to nest w/nest copy; step 135, nestX1,Y1 11 17, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 135, nestX1,Y1 11 17, ratio 3 Dointerp: copying from old nest ( 4:106, 1:100) to new ( 1:103, 7:106); 91.7% overlap Interpolating > nest to coarse; step 135, nestX1,Y1 11 17, ratio 3 Interpolating > nest to coarse; step 136, nestX1,Y1 11 17, ratio 3 Interpolating > nest to coarse; step 137, nestX1,Y1 11 17, ratio 3 Interpolating > nest to coarse; step 138, nestX1,Y1 11 17, ratio 3 Interpolating > nest to coarse; step 139, nestX1,Y1 11 17, ratio 3 NEST CHECK at time step 140 Max trunc error = 2.7311 bounded by ( 24: 37 , 25: 39); center = ( 30, 32) Old nest saved: X1,X2,Y1,Y2= 11 46 17 52 MOVING nest; N=140 TruncErr center 30 32 nest bounds: X = ( 13: 48), Y = ( 15: 50) Interpolating > coarse to nest w/nest copy; step 140, nestX1,Y1 13 15, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 140, nestX1,Y1 13 15, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > nest to coarse; step 140, nestX1,Y1 13 15, ratio 3 140 1.22173 9.77188 33 29 -0.26659 29 37 Plotting coarse + nested grids at n= 140 Interpolating > nest to coarse; step 141, nestX1,Y1 13 15, ratio 3 Interpolating > nest to coarse; step 142, nestX1,Y1 13 15, ratio 3 Interpolating > nest to coarse; step 143, nestX1,Y1 13 15, ratio 3 Interpolating > nest to coarse; step 144, nestX1,Y1 13 15, ratio 3 NEST CHECK at time step 145 Max trunc error = 2.9022 bounded by ( 26: 39 , 23: 37); center = ( 32, 30) Old nest saved: X1,X2,Y1,Y2= 13 48 15 50 MOVING nest; N=145 TruncErr center 32 30 nest bounds: X = ( 15: 50), Y = ( 13: 48) Interpolating > coarse to nest w/nest copy; step 145, nestX1,Y1 15 13, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 145, nestX1,Y1 15 13, ratio 3 Dointerp: copying from old nest ( 7:106, 1:100) to new ( 1:100, 7:106); 89.0% overlap Interpolating > nest to coarse; step 145, nestX1,Y1 15 13, ratio 3 Interpolating > nest to coarse; step 146, nestX1,Y1 15 13, ratio 3 Interpolating > nest to coarse; step 147, nestX1,Y1 15 13, ratio 3 Interpolating > nest to coarse; step 148, nestX1,Y1 15 13, ratio 3 Interpolating > nest to coarse; step 149, nestX1,Y1 15 13, ratio 3 NEST CHECK at time step 150 Max trunc error = 3.0745 bounded by ( 28: 42 , 22: 31); center = ( 35, 26) Old nest saved: X1,X2,Y1,Y2= 15 50 13 48 MOVING nest; N=150 TruncErr center 35 26 nest bounds: X = ( 18: 53), Y = ( 9: 44) Interpolating > coarse to nest w/nest copy; step 150, nestX1,Y1 18 9, ratio 3 Dointerp: copying from old nest ( 10:106, 1: 94) to new ( 1: 97, 13:106); 81.1% overlap Interpolating > coarse to nest w/nest copy; step 150, nestX1,Y1 18 9, ratio 3 Dointerp: copying from old nest ( 10:106, 1: 94) to new ( 1: 97, 13:106); 81.1% overlap Interpolating > nest to coarse; step 150, nestX1,Y1 18 9, ratio 3 150 1.30900 9.74512 38 26 -0.27046 32 33 Plotting coarse + nested grids at n= 150 Interpolating > nest to coarse; step 151, nestX1,Y1 18 9, ratio 3 Interpolating > nest to coarse; step 152, nestX1,Y1 18 9, ratio 3 Interpolating > nest to coarse; step 153, nestX1,Y1 18 9, ratio 3 Interpolating > nest to coarse; step 154, nestX1,Y1 18 9, ratio 3 NEST CHECK at time step 155 Max trunc error = 3.1418 bounded by ( 30: 44 , 21: 29); center = ( 37, 25) Old nest saved: X1,X2,Y1,Y2= 18 53 9 44 MOVING nest; N=155 TruncErr center 37 25 nest bounds: X = ( 20: 55), Y = ( 8: 43) Interpolating > coarse to nest w/nest copy; step 155, nestX1,Y1 20 8, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 155, nestX1,Y1 20 8, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap Interpolating > nest to coarse; step 155, nestX1,Y1 20 8, ratio 3 Interpolating > nest to coarse; step 156, nestX1,Y1 20 8, ratio 3 Interpolating > nest to coarse; step 157, nestX1,Y1 20 8, ratio 3 Interpolating > nest to coarse; step 158, nestX1,Y1 20 8, ratio 3 Interpolating > nest to coarse; step 159, nestX1,Y1 20 8, ratio 3 NEST CHECK at time step 160 Max trunc error = 3.0882 bounded by ( 33: 47 , 20: 28); center = ( 40, 24) Old nest saved: X1,X2,Y1,Y2= 20 55 8 43 MOVING nest; N=160 TruncErr center 40 24 nest bounds: X = ( 23: 58), Y = ( 7: 42) Interpolating > coarse to nest w/nest copy; step 160, nestX1,Y1 23 7, ratio 3 Dointerp: copying from old nest ( 10:106, 1:103) to new ( 1: 97, 4:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 160, nestX1,Y1 23 7, ratio 3 Dointerp: copying from old nest ( 10:106, 1:103) to new ( 1: 97, 4:106); 88.9% overlap Interpolating > nest to coarse; step 160, nestX1,Y1 23 7, ratio 3 160 1.39626 9.75276 43 24 -0.27496 35 28 Plotting coarse + nested grids at n= 160 Interpolating > nest to coarse; step 161, nestX1,Y1 23 7, ratio 3 Interpolating > nest to coarse; step 162, nestX1,Y1 23 7, ratio 3 Interpolating > nest to coarse; step 163, nestX1,Y1 23 7, ratio 3 Interpolating > nest to coarse; step 164, nestX1,Y1 23 7, ratio 3 NEST CHECK at time step 165 Max trunc error = 3.1963 bounded by ( 35: 49 , 20: 27); center = ( 42, 23) Old nest saved: X1,X2,Y1,Y2= 23 58 7 42 MOVING nest; N=165 TruncErr center 42 23 nest bounds: X = ( 25: 60), Y = ( 6: 41) Interpolating > coarse to nest w/nest copy; step 165, nestX1,Y1 25 6, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 165, nestX1,Y1 25 6, ratio 3 Dointerp: copying from old nest ( 7:106, 1:103) to new ( 1:100, 4:106); 91.7% overlap Interpolating > nest to coarse; step 165, nestX1,Y1 25 6, ratio 3 Interpolating > nest to coarse; step 166, nestX1,Y1 25 6, ratio 3 Interpolating > nest to coarse; step 167, nestX1,Y1 25 6, ratio 3 Interpolating > nest to coarse; step 168, nestX1,Y1 25 6, ratio 3 Interpolating > nest to coarse; step 169, nestX1,Y1 25 6, ratio 3 NEST CHECK at time step 170 Max trunc error = 3.1816 bounded by ( 38: 52 , 19: 26); center = ( 45, 22) Old nest saved: X1,X2,Y1,Y2= 25 60 6 41 MOVING nest; N=170 TruncErr center 45 22 nest bounds: X = ( 28: 63), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 170, nestX1,Y1 28 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:103) to new ( 1: 97, 4:106); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 170, nestX1,Y1 28 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:103) to new ( 1: 97, 4:106); 88.9% overlap Interpolating > nest to coarse; step 170, nestX1,Y1 28 5, ratio 3 170 1.48353 9.72902 48 22 -0.28553 40 26 Plotting coarse + nested grids at n= 170 Interpolating > nest to coarse; step 171, nestX1,Y1 28 5, ratio 3 Interpolating > nest to coarse; step 172, nestX1,Y1 28 5, ratio 3 Interpolating > nest to coarse; step 173, nestX1,Y1 28 5, ratio 3 Interpolating > nest to coarse; step 174, nestX1,Y1 28 5, ratio 3 NEST CHECK at time step 175 Max trunc error = 3.0042 bounded by ( 41: 54 , 19: 26); center = ( 47, 22) Old nest saved: X1,X2,Y1,Y2= 28 63 5 40 MOVING nest; N=175 TruncErr center 47 22 nest bounds: X = ( 30: 65), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 175, nestX1,Y1 30 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 175, nestX1,Y1 30 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > nest to coarse; step 175, nestX1,Y1 30 5, ratio 3 Interpolating > nest to coarse; step 176, nestX1,Y1 30 5, ratio 3 Interpolating > nest to coarse; step 177, nestX1,Y1 30 5, ratio 3 Interpolating > nest to coarse; step 178, nestX1,Y1 30 5, ratio 3 Interpolating > nest to coarse; step 179, nestX1,Y1 30 5, ratio 3 NEST CHECK at time step 180 Max trunc error = 3.1810 bounded by ( 44: 57 , 18: 26); center = ( 50, 22) Old nest saved: X1,X2,Y1,Y2= 30 65 5 40 MOVING nest; N=180 TruncErr center 50 22 nest bounds: X = ( 33: 68), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 180, nestX1,Y1 33 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 180, nestX1,Y1 33 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > nest to coarse; step 180, nestX1,Y1 33 5, ratio 3 180 1.57080 9.79909 53 22 -0.29609 45 24 Plotting coarse + nested grids at n= 180 Interpolating > nest to coarse; step 181, nestX1,Y1 33 5, ratio 3 Interpolating > nest to coarse; step 182, nestX1,Y1 33 5, ratio 3 Interpolating > nest to coarse; step 183, nestX1,Y1 33 5, ratio 3 Interpolating > nest to coarse; step 184, nestX1,Y1 33 5, ratio 3 NEST CHECK at time step 185 Max trunc error = 3.1823 bounded by ( 46: 60 , 18: 26); center = ( 53, 22) Old nest saved: X1,X2,Y1,Y2= 33 68 5 40 MOVING nest; N=185 TruncErr center 53 22 nest bounds: X = ( 36: 71), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 185, nestX1,Y1 36 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 185, nestX1,Y1 36 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > nest to coarse; step 185, nestX1,Y1 36 5, ratio 3 Interpolating > nest to coarse; step 186, nestX1,Y1 36 5, ratio 3 Interpolating > nest to coarse; step 187, nestX1,Y1 36 5, ratio 3 Interpolating > nest to coarse; step 188, nestX1,Y1 36 5, ratio 3 Interpolating > nest to coarse; step 189, nestX1,Y1 36 5, ratio 3 NEST CHECK at time step 190 Max trunc error = 3.0193 bounded by ( 49: 63 , 19: 26); center = ( 56, 22) Old nest saved: X1,X2,Y1,Y2= 36 71 5 40 MOVING nest; N=190 TruncErr center 56 22 nest bounds: X = ( 39: 74), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 190, nestX1,Y1 39 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 190, nestX1,Y1 39 5, ratio 3 Dointerp: copying from old nest ( 10:106, 1:106) to new ( 1: 97, 1:106); 91.5% overlap Interpolating > nest to coarse; step 190, nestX1,Y1 39 5, ratio 3 190 1.65806 9.73778 59 22 -0.31746 50 22 Plotting coarse + nested grids at n= 190 Interpolating > nest to coarse; step 191, nestX1,Y1 39 5, ratio 3 Interpolating > nest to coarse; step 192, nestX1,Y1 39 5, ratio 3 Interpolating > nest to coarse; step 193, nestX1,Y1 39 5, ratio 3 Interpolating > nest to coarse; step 194, nestX1,Y1 39 5, ratio 3 NEST CHECK at time step 195 Max trunc error = 3.0571 bounded by ( 52: 65 , 19: 26); center = ( 58, 22) Old nest saved: X1,X2,Y1,Y2= 39 74 5 40 MOVING nest; N=195 TruncErr center 58 22 nest bounds: X = ( 41: 76), Y = ( 5: 40) Interpolating > coarse to nest w/nest copy; step 195, nestX1,Y1 41 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 195, nestX1,Y1 41 5, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > nest to coarse; step 195, nestX1,Y1 41 5, ratio 3 Interpolating > nest to coarse; step 196, nestX1,Y1 41 5, ratio 3 Interpolating > nest to coarse; step 197, nestX1,Y1 41 5, ratio 3 Interpolating > nest to coarse; step 198, nestX1,Y1 41 5, ratio 3 Interpolating > nest to coarse; step 199, nestX1,Y1 41 5, ratio 3 NEST CHECK at time step 200 Max trunc error = 3.0658 bounded by ( 54: 68 , 20: 27); center = ( 61, 23) Old nest saved: X1,X2,Y1,Y2= 41 76 5 40 MOVING nest; N=200 TruncErr center 61 23 nest bounds: X = ( 44: 79), Y = ( 6: 41) Interpolating > coarse to nest w/nest copy; step 200, nestX1,Y1 44 6, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 200, nestX1,Y1 44 6, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > nest to coarse; step 200, nestX1,Y1 44 6, ratio 3 200 1.74533 9.82910 64 24 -0.33077 56 21 Plotting coarse + nested grids at n= 200 Interpolating > nest to coarse; step 201, nestX1,Y1 44 6, ratio 3 Interpolating > nest to coarse; step 202, nestX1,Y1 44 6, ratio 3 Interpolating > nest to coarse; step 203, nestX1,Y1 44 6, ratio 3 Interpolating > nest to coarse; step 204, nestX1,Y1 44 6, ratio 3 NEST CHECK at time step 205 Max trunc error = 2.8529 bounded by ( 57: 70 , 20: 29); center = ( 63, 24) Old nest saved: X1,X2,Y1,Y2= 44 79 6 41 MOVING nest; N=205 TruncErr center 63 24 nest bounds: X = ( 46: 81), Y = ( 7: 42) Interpolating > coarse to nest w/nest copy; step 205, nestX1,Y1 46 7, ratio 3 Dointerp: copying from old nest ( 7:106, 4:106) to new ( 1:100, 1:103); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 205, nestX1,Y1 46 7, ratio 3 Dointerp: copying from old nest ( 7:106, 4:106) to new ( 1:100, 1:103); 91.7% overlap Interpolating > nest to coarse; step 205, nestX1,Y1 46 7, ratio 3 Interpolating > nest to coarse; step 206, nestX1,Y1 46 7, ratio 3 Interpolating > nest to coarse; step 207, nestX1,Y1 46 7, ratio 3 Interpolating > nest to coarse; step 208, nestX1,Y1 46 7, ratio 3 Interpolating > nest to coarse; step 209, nestX1,Y1 46 7, ratio 3 NEST CHECK at time step 210 Max trunc error = 2.9535 bounded by ( 59: 73 , 21: 30); center = ( 66, 25) Old nest saved: X1,X2,Y1,Y2= 46 81 7 42 MOVING nest; N=210 TruncErr center 66 25 nest bounds: X = ( 49: 84), Y = ( 8: 43) Interpolating > coarse to nest w/nest copy; step 210, nestX1,Y1 49 8, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 210, nestX1,Y1 49 8, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > nest to coarse; step 210, nestX1,Y1 49 8, ratio 3 210 1.83260 9.83023 69 26 -0.34882 61 23 Plotting coarse + nested grids at n= 210 Interpolating > nest to coarse; step 211, nestX1,Y1 49 8, ratio 3 Interpolating > nest to coarse; step 212, nestX1,Y1 49 8, ratio 3 Interpolating > nest to coarse; step 213, nestX1,Y1 49 8, ratio 3 Interpolating > nest to coarse; step 214, nestX1,Y1 49 8, ratio 3 NEST CHECK at time step 215 Max trunc error = 2.8175 bounded by ( 61: 75 , 19: 32); center = ( 68, 25) Old nest saved: X1,X2,Y1,Y2= 49 84 8 43 MOVING nest; N=215 TruncErr center 68 25 nest bounds: X = ( 51: 86), Y = ( 8: 43) Interpolating > coarse to nest w/nest copy; step 215, nestX1,Y1 51 8, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 215, nestX1,Y1 51 8, ratio 3 Dointerp: copying from old nest ( 7:106, 1:106) to new ( 1:100, 1:106); 94.3% overlap Interpolating > nest to coarse; step 215, nestX1,Y1 51 8, ratio 3 Interpolating > nest to coarse; step 216, nestX1,Y1 51 8, ratio 3 Interpolating > nest to coarse; step 217, nestX1,Y1 51 8, ratio 3 Interpolating > nest to coarse; step 218, nestX1,Y1 51 8, ratio 3 Interpolating > nest to coarse; step 219, nestX1,Y1 51 8, ratio 3 NEST CHECK at time step 220 Max trunc error = 2.6423 bounded by ( 64: 78 , 20: 33); center = ( 71, 26) Old nest saved: X1,X2,Y1,Y2= 51 86 8 43 MOVING nest; N=220 TruncErr center 71 26 nest bounds: X = ( 54: 89), Y = ( 9: 44) Interpolating > coarse to nest w/nest copy; step 220, nestX1,Y1 54 9, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 220, nestX1,Y1 54 9, ratio 3 Dointerp: copying from old nest ( 10:106, 4:106) to new ( 1: 97, 1:103); 88.9% overlap Interpolating > nest to coarse; step 220, nestX1,Y1 54 9, ratio 3 220 1.91986 9.75644 74 29 -0.35906 66 25 Plotting coarse + nested grids at n= 220 Interpolating > nest to coarse; step 221, nestX1,Y1 54 9, ratio 3 Interpolating > nest to coarse; step 222, nestX1,Y1 54 9, ratio 3 Interpolating > nest to coarse; step 223, nestX1,Y1 54 9, ratio 3 Interpolating > nest to coarse; step 224, nestX1,Y1 54 9, ratio 3 NEST CHECK at time step 225 Max trunc error = 2.7028 bounded by ( 66: 80 , 21: 35); center = ( 73, 28) Old nest saved: X1,X2,Y1,Y2= 54 89 9 44 MOVING nest; N=225 TruncErr center 73 28 nest bounds: X = ( 56: 91), Y = ( 11: 46) Interpolating > coarse to nest w/nest copy; step 225, nestX1,Y1 56 11, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 225, nestX1,Y1 56 11, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap Interpolating > nest to coarse; step 225, nestX1,Y1 56 11, ratio 3 Interpolating > nest to coarse; step 226, nestX1,Y1 56 11, ratio 3 Interpolating > nest to coarse; step 227, nestX1,Y1 56 11, ratio 3 Interpolating > nest to coarse; step 228, nestX1,Y1 56 11, ratio 3 Interpolating > nest to coarse; step 229, nestX1,Y1 56 11, ratio 3 NEST CHECK at time step 230 Max trunc error = 2.8829 bounded by ( 68: 81 , 23: 37); center = ( 74, 30) Old nest saved: X1,X2,Y1,Y2= 56 91 11 46 MOVING nest; N=230 TruncErr center 74 30 nest bounds: X = ( 57: 92), Y = ( 13: 48) Interpolating > coarse to nest w/nest copy; step 230, nestX1,Y1 57 13, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 230, nestX1,Y1 57 13, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > nest to coarse; step 230, nestX1,Y1 57 13, ratio 3 230 2.00713 9.75403 78 33 -0.35987 70 29 Plotting coarse + nested grids at n= 230 Interpolating > nest to coarse; step 231, nestX1,Y1 57 13, ratio 3 Interpolating > nest to coarse; step 232, nestX1,Y1 57 13, ratio 3 Interpolating > nest to coarse; step 233, nestX1,Y1 57 13, ratio 3 Interpolating > nest to coarse; step 234, nestX1,Y1 57 13, ratio 3 NEST CHECK at time step 235 Max trunc error = 2.9864 bounded by ( 75: 83 , 26: 39); center = ( 79, 32) Old nest saved: X1,X2,Y1,Y2= 57 92 13 48 MOVING nest; N=235 TruncErr center 79 32 nest bounds: X = ( 62: 97), Y = ( 15: 50) Interpolating > coarse to nest w/nest copy; step 235, nestX1,Y1 62 15, ratio 3 Dointerp: copying from old nest ( 16:106, 7:106) to new ( 1: 91, 1:100); 81.0% overlap Interpolating > coarse to nest w/nest copy; step 235, nestX1,Y1 62 15, ratio 3 Dointerp: copying from old nest ( 16:106, 7:106) to new ( 1: 91, 1:100); 81.0% overlap Interpolating > nest to coarse; step 235, nestX1,Y1 62 15, ratio 3 Interpolating > nest to coarse; step 236, nestX1,Y1 62 15, ratio 3 Interpolating > nest to coarse; step 237, nestX1,Y1 62 15, ratio 3 Interpolating > nest to coarse; step 238, nestX1,Y1 62 15, ratio 3 Interpolating > nest to coarse; step 239, nestX1,Y1 62 15, ratio 3 NEST CHECK at time step 240 Max trunc error = 2.9913 bounded by ( 77: 85 , 28: 41); center = ( 81, 34) Old nest saved: X1,X2,Y1,Y2= 62 97 15 50 MOVING nest; N=240 TruncErr center 81 34 nest bounds: X = ( 64: 99), Y = ( 17: 52) Interpolating > coarse to nest w/nest copy; step 240, nestX1,Y1 64 17, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 240, nestX1,Y1 64 17, ratio 3 Dointerp: copying from old nest ( 7:106, 7:106) to new ( 1:100, 1:100); 89.0% overlap Interpolating > nest to coarse; step 240, nestX1,Y1 64 17, ratio 3 240 2.09440 9.78064 81 38 -0.37308 74 32 Plotting coarse + nested grids at n= 240 Interpolating > nest to coarse; step 241, nestX1,Y1 64 17, ratio 3 Interpolating > nest to coarse; step 242, nestX1,Y1 64 17, ratio 3 Interpolating > nest to coarse; step 243, nestX1,Y1 64 17, ratio 3 Interpolating > nest to coarse; step 244, nestX1,Y1 64 17, ratio 3 NEST CHECK at time step 245 Max trunc error = 3.0033 bounded by ( 78: 86 , 30: 44); center = ( 82, 37) Old nest saved: X1,X2,Y1,Y2= 64 99 17 52 MOVING nest; N=245 TruncErr center 82 37 nest bounds: X = ( 65:100), Y = ( 20: 55) Interpolating > coarse to nest w/nest copy; step 245, nestX1,Y1 65 20, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 245, nestX1,Y1 65 20, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap Interpolating > nest to coarse; step 245, nestX1,Y1 65 20, ratio 3 Interpolating > nest to coarse; step 246, nestX1,Y1 65 20, ratio 3 Interpolating > nest to coarse; step 247, nestX1,Y1 65 20, ratio 3 Interpolating > nest to coarse; step 248, nestX1,Y1 65 20, ratio 3 Interpolating > nest to coarse; step 249, nestX1,Y1 65 20, ratio 3 NEST CHECK at time step 250 Max trunc error = 3.1442 bounded by ( 79: 86 , 33: 46); center = ( 82, 39) Old nest saved: X1,X2,Y1,Y2= 65 100 20 55 MOVING nest; N=250 TruncErr center 82 39 nest bounds: X = ( 65:100), Y = ( 22: 57) Interpolating > coarse to nest w/nest copy; step 250, nestX1,Y1 65 22, ratio 3 Dointerp: copying from old nest ( 1:106, 7:106) to new ( 1:106, 1:100); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 250, nestX1,Y1 65 22, ratio 3 Dointerp: copying from old nest ( 1:106, 7:106) to new ( 1:106, 1:100); 94.3% overlap Interpolating > nest to coarse; step 250, nestX1,Y1 65 22, ratio 3 250 2.18166 9.81733 83 43 -0.37375 77 36 Plotting coarse + nested grids at n= 250 Interpolating > nest to coarse; step 251, nestX1,Y1 65 22, ratio 3 Interpolating > nest to coarse; step 252, nestX1,Y1 65 22, ratio 3 Interpolating > nest to coarse; step 253, nestX1,Y1 65 22, ratio 3 Interpolating > nest to coarse; step 254, nestX1,Y1 65 22, ratio 3 NEST CHECK at time step 255 Max trunc error = 3.0544 bounded by ( 80: 87 , 35: 49); center = ( 83, 42) Old nest saved: X1,X2,Y1,Y2= 65 100 22 57 MOVING nest; N=255 TruncErr center 83 42 nest bounds: X = ( 66:101), Y = ( 25: 60) Interpolating > coarse to nest w/nest copy; step 255, nestX1,Y1 66 25, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 255, nestX1,Y1 66 25, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap Interpolating > nest to coarse; step 255, nestX1,Y1 66 25, ratio 3 Interpolating > nest to coarse; step 256, nestX1,Y1 66 25, ratio 3 Interpolating > nest to coarse; step 257, nestX1,Y1 66 25, ratio 3 Interpolating > nest to coarse; step 258, nestX1,Y1 66 25, ratio 3 Interpolating > nest to coarse; step 259, nestX1,Y1 66 25, ratio 3 NEST CHECK at time step 260 Max trunc error = 3.0906 bounded by ( 81: 88 , 38: 51); center = ( 84, 44) Old nest saved: X1,X2,Y1,Y2= 66 101 25 60 MOVING nest; N=260 TruncErr center 84 44 nest bounds: X = ( 67:102), Y = ( 27: 62) Interpolating > coarse to nest w/nest copy; step 260, nestX1,Y1 67 27, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 260, nestX1,Y1 67 27, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > nest to coarse; step 260, nestX1,Y1 67 27, ratio 3 260 2.26893 9.79259 84 48 -0.37863 79 41 Plotting coarse + nested grids at n= 260 Interpolating > nest to coarse; step 261, nestX1,Y1 67 27, ratio 3 Interpolating > nest to coarse; step 262, nestX1,Y1 67 27, ratio 3 Interpolating > nest to coarse; step 263, nestX1,Y1 67 27, ratio 3 Interpolating > nest to coarse; step 264, nestX1,Y1 67 27, ratio 3 NEST CHECK at time step 265 Max trunc error = 3.1457 bounded by ( 81: 88 , 41: 54); center = ( 84, 47) Old nest saved: X1,X2,Y1,Y2= 67 102 27 62 MOVING nest; N=265 TruncErr center 84 47 nest bounds: X = ( 67:102), Y = ( 30: 65) Interpolating > coarse to nest w/nest copy; step 265, nestX1,Y1 67 30, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 265, nestX1,Y1 67 30, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > nest to coarse; step 265, nestX1,Y1 67 30, ratio 3 Interpolating > nest to coarse; step 266, nestX1,Y1 67 30, ratio 3 Interpolating > nest to coarse; step 267, nestX1,Y1 67 30, ratio 3 Interpolating > nest to coarse; step 268, nestX1,Y1 67 30, ratio 3 Interpolating > nest to coarse; step 269, nestX1,Y1 67 30, ratio 3 NEST CHECK at time step 270 Max trunc error = 3.0526 bounded by ( 82: 88 , 43: 57); center = ( 85, 50) Old nest saved: X1,X2,Y1,Y2= 67 102 30 65 MOVING nest; N=270 TruncErr center 85 50 nest bounds: X = ( 68:103), Y = ( 33: 68) Interpolating > coarse to nest w/nest copy; step 270, nestX1,Y1 68 33, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 270, nestX1,Y1 68 33, ratio 3 Dointerp: copying from old nest ( 4:106, 10:106) to new ( 1:103, 1: 97); 88.9% overlap Interpolating > nest to coarse; step 270, nestX1,Y1 68 33, ratio 3 270 2.35619 9.83754 85 53 -0.39231 82 45 Plotting coarse + nested grids at n= 270 Interpolating > nest to coarse; step 271, nestX1,Y1 68 33, ratio 3 Interpolating > nest to coarse; step 272, nestX1,Y1 68 33, ratio 3 Interpolating > nest to coarse; step 273, nestX1,Y1 68 33, ratio 3 Interpolating > nest to coarse; step 274, nestX1,Y1 68 33, ratio 3 NEST CHECK at time step 275 Max trunc error = 2.9725 bounded by ( 82: 89 , 46: 60); center = ( 85, 53) Old nest saved: X1,X2,Y1,Y2= 68 103 33 68 MOVING nest; N=275 TruncErr center 85 53 nest bounds: X = ( 68:103), Y = ( 36: 71) Interpolating > coarse to nest w/nest copy; step 275, nestX1,Y1 68 36, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 275, nestX1,Y1 68 36, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > nest to coarse; step 275, nestX1,Y1 68 36, ratio 3 Interpolating > nest to coarse; step 276, nestX1,Y1 68 36, ratio 3 Interpolating > nest to coarse; step 277, nestX1,Y1 68 36, ratio 3 Interpolating > nest to coarse; step 278, nestX1,Y1 68 36, ratio 3 Interpolating > nest to coarse; step 279, nestX1,Y1 68 36, ratio 3 NEST CHECK at time step 280 Max trunc error = 3.0589 bounded by ( 81: 88 , 49: 62); center = ( 84, 55) Old nest saved: X1,X2,Y1,Y2= 68 103 36 71 MOVING nest; N=280 TruncErr center 84 55 nest bounds: X = ( 67:102), Y = ( 38: 73) Interpolating > coarse to nest w/nest copy; step 280, nestX1,Y1 67 38, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 280, nestX1,Y1 67 38, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > nest to coarse; step 280, nestX1,Y1 67 38, ratio 3 280 2.44346 9.81403 85 59 -0.40861 84 50 Plotting coarse + nested grids at n= 280 Interpolating > nest to coarse; step 281, nestX1,Y1 67 38, ratio 3 Interpolating > nest to coarse; step 282, nestX1,Y1 67 38, ratio 3 Interpolating > nest to coarse; step 283, nestX1,Y1 67 38, ratio 3 Interpolating > nest to coarse; step 284, nestX1,Y1 67 38, ratio 3 NEST CHECK at time step 285 Max trunc error = 2.9946 bounded by ( 81: 88 , 51: 65); center = ( 84, 58) Old nest saved: X1,X2,Y1,Y2= 67 102 38 73 MOVING nest; N=285 TruncErr center 84 58 nest bounds: X = ( 67:102), Y = ( 41: 76) Interpolating > coarse to nest w/nest copy; step 285, nestX1,Y1 67 41, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > coarse to nest w/nest copy; step 285, nestX1,Y1 67 41, ratio 3 Dointerp: copying from old nest ( 1:106, 10:106) to new ( 1:106, 1: 97); 91.5% overlap Interpolating > nest to coarse; step 285, nestX1,Y1 67 41, ratio 3 Interpolating > nest to coarse; step 286, nestX1,Y1 67 41, ratio 3 Interpolating > nest to coarse; step 287, nestX1,Y1 67 41, ratio 3 Interpolating > nest to coarse; step 288, nestX1,Y1 67 41, ratio 3 Interpolating > nest to coarse; step 289, nestX1,Y1 67 41, ratio 3 NEST CHECK at time step 290 Max trunc error = 2.8300 bounded by ( 80: 87 , 54: 68); center = ( 83, 61) Old nest saved: X1,X2,Y1,Y2= 67 102 41 76 MOVING nest; N=290 TruncErr center 83 61 nest bounds: X = ( 66:101), Y = ( 44: 79) Interpolating > coarse to nest w/nest copy; step 290, nestX1,Y1 66 44, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 290, nestX1,Y1 66 44, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap Interpolating > nest to coarse; step 290, nestX1,Y1 66 44, ratio 3 290 2.53073 9.89035 83 64 -0.41486 87 56 Plotting coarse + nested grids at n= 290 Interpolating > nest to coarse; step 291, nestX1,Y1 66 44, ratio 3 Interpolating > nest to coarse; step 292, nestX1,Y1 66 44, ratio 3 Interpolating > nest to coarse; step 293, nestX1,Y1 66 44, ratio 3 Interpolating > nest to coarse; step 294, nestX1,Y1 66 44, ratio 3 NEST CHECK at time step 295 Max trunc error = 2.9552 bounded by ( 79: 86 , 57: 70); center = ( 82, 63) Old nest saved: X1,X2,Y1,Y2= 66 101 44 79 MOVING nest; N=295 TruncErr center 82 63 nest bounds: X = ( 65:100), Y = ( 46: 81) Interpolating > coarse to nest w/nest copy; step 295, nestX1,Y1 65 46, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 295, nestX1,Y1 65 46, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > nest to coarse; step 295, nestX1,Y1 65 46, ratio 3 Interpolating > nest to coarse; step 296, nestX1,Y1 65 46, ratio 3 Interpolating > nest to coarse; step 297, nestX1,Y1 65 46, ratio 3 Interpolating > nest to coarse; step 298, nestX1,Y1 65 46, ratio 3 Interpolating > nest to coarse; step 299, nestX1,Y1 65 46, ratio 3 NEST CHECK at time step 300 Max trunc error = 2.7529 bounded by ( 77: 86 , 59: 73); center = ( 81, 66) Old nest saved: X1,X2,Y1,Y2= 65 100 46 81 MOVING nest; N=300 TruncErr center 81 66 nest bounds: X = ( 64: 99), Y = ( 49: 84) Interpolating > coarse to nest w/nest copy; step 300, nestX1,Y1 64 49, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 300, nestX1,Y1 64 49, ratio 3 Dointerp: copying from old nest ( 1:103, 10:106) to new ( 4:106, 1: 97); 88.9% overlap Interpolating > nest to coarse; step 300, nestX1,Y1 64 49, ratio 3 300 2.61799 9.90980 81 69 -0.42547 84 61 Plotting coarse + nested grids at n= 300 Interpolating > nest to coarse; step 301, nestX1,Y1 64 49, ratio 3 Interpolating > nest to coarse; step 302, nestX1,Y1 64 49, ratio 3 Interpolating > nest to coarse; step 303, nestX1,Y1 64 49, ratio 3 Interpolating > nest to coarse; step 304, nestX1,Y1 64 49, ratio 3 NEST CHECK at time step 305 Max trunc error = 2.7985 bounded by ( 76: 89 , 61: 75); center = ( 82, 68) Old nest saved: X1,X2,Y1,Y2= 64 99 49 84 MOVING nest; N=305 TruncErr center 82 68 nest bounds: X = ( 65:100), Y = ( 51: 86) Interpolating > coarse to nest w/nest copy; step 305, nestX1,Y1 65 51, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 305, nestX1,Y1 65 51, ratio 3 Dointerp: copying from old nest ( 4:106, 7:106) to new ( 1:103, 1:100); 91.7% overlap Interpolating > nest to coarse; step 305, nestX1,Y1 65 51, ratio 3 Interpolating > nest to coarse; step 306, nestX1,Y1 65 51, ratio 3 Interpolating > nest to coarse; step 307, nestX1,Y1 65 51, ratio 3 Interpolating > nest to coarse; step 308, nestX1,Y1 65 51, ratio 3 Interpolating > nest to coarse; step 309, nestX1,Y1 65 51, ratio 3 NEST CHECK at time step 310 Max trunc error = 2.7139 bounded by ( 74: 87 , 64: 77); center = ( 80, 70) Old nest saved: X1,X2,Y1,Y2= 65 100 51 86 MOVING nest; N=310 TruncErr center 80 70 nest bounds: X = ( 63: 98), Y = ( 53: 88) Interpolating > coarse to nest w/nest copy; step 310, nestX1,Y1 63 53, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 310, nestX1,Y1 63 53, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > nest to coarse; step 310, nestX1,Y1 63 53, ratio 3 310 2.70526 9.84574 78 74 -0.43726 80 65 Plotting coarse + nested grids at n= 310 Interpolating > nest to coarse; step 311, nestX1,Y1 63 53, ratio 3 Interpolating > nest to coarse; step 312, nestX1,Y1 63 53, ratio 3 Interpolating > nest to coarse; step 313, nestX1,Y1 63 53, ratio 3 Interpolating > nest to coarse; step 314, nestX1,Y1 63 53, ratio 3 NEST CHECK at time step 315 Max trunc error = 2.5573 bounded by ( 72: 86 , 66: 79); center = ( 79, 72) Old nest saved: X1,X2,Y1,Y2= 63 98 53 88 MOVING nest; N=315 TruncErr center 79 72 nest bounds: X = ( 62: 97), Y = ( 55: 90) Interpolating > coarse to nest w/nest copy; step 315, nestX1,Y1 62 55, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > coarse to nest w/nest copy; step 315, nestX1,Y1 62 55, ratio 3 Dointerp: copying from old nest ( 1:103, 7:106) to new ( 4:106, 1:100); 91.7% overlap Interpolating > nest to coarse; step 315, nestX1,Y1 62 55, ratio 3 Interpolating > nest to coarse; step 316, nestX1,Y1 62 55, ratio 3 Interpolating > nest to coarse; step 317, nestX1,Y1 62 55, ratio 3 Interpolating > nest to coarse; step 318, nestX1,Y1 62 55, ratio 3 Interpolating > nest to coarse; step 319, nestX1,Y1 62 55, ratio 3 NEST CHECK at time step 320 Max trunc error = 2.6147 bounded by ( 70: 84 , 68: 81); center = ( 77, 74) Old nest saved: X1,X2,Y1,Y2= 62 97 55 90 MOVING nest; N=320 TruncErr center 77 74 nest bounds: X = ( 60: 95), Y = ( 57: 92) Interpolating > coarse to nest w/nest copy; step 320, nestX1,Y1 60 57, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 320, nestX1,Y1 60 57, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > nest to coarse; step 320, nestX1,Y1 60 57, ratio 3 320 2.79253 9.83938 74 77 -0.44529 79 70 Plotting coarse + nested grids at n= 320 Interpolating > nest to coarse; step 321, nestX1,Y1 60 57, ratio 3 Interpolating > nest to coarse; step 322, nestX1,Y1 60 57, ratio 3 Interpolating > nest to coarse; step 323, nestX1,Y1 60 57, ratio 3 Interpolating > nest to coarse; step 324, nestX1,Y1 60 57, ratio 3 NEST CHECK at time step 325 Max trunc error = 2.7438 bounded by ( 68: 82 , 74: 83); center = ( 75, 78) Old nest saved: X1,X2,Y1,Y2= 60 95 57 92 MOVING nest; N=325 TruncErr center 75 78 nest bounds: X = ( 58: 93), Y = ( 61: 96) Interpolating > coarse to nest w/nest copy; step 325, nestX1,Y1 58 61, ratio 3 Dointerp: copying from old nest ( 1:100, 13:106) to new ( 7:106, 1: 94); 83.7% overlap Interpolating > coarse to nest w/nest copy; step 325, nestX1,Y1 58 61, ratio 3 Dointerp: copying from old nest ( 1:100, 13:106) to new ( 7:106, 1: 94); 83.7% overlap Interpolating > nest to coarse; step 325, nestX1,Y1 58 61, ratio 3 Interpolating > nest to coarse; step 326, nestX1,Y1 58 61, ratio 3 Interpolating > nest to coarse; step 327, nestX1,Y1 58 61, ratio 3 Interpolating > nest to coarse; step 328, nestX1,Y1 58 61, ratio 3 Interpolating > nest to coarse; step 329, nestX1,Y1 58 61, ratio 3 NEST CHECK at time step 330 Max trunc error = 2.9275 bounded by ( 66: 80 , 76: 84); center = ( 73, 80) Old nest saved: X1,X2,Y1,Y2= 58 93 61 96 MOVING nest; N=330 TruncErr center 73 80 nest bounds: X = ( 56: 91), Y = ( 63: 98) Interpolating > coarse to nest w/nest copy; step 330, nestX1,Y1 56 63, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > coarse to nest w/nest copy; step 330, nestX1,Y1 56 63, ratio 3 Dointerp: copying from old nest ( 1:100, 7:106) to new ( 7:106, 1:100); 89.0% overlap Interpolating > nest to coarse; step 330, nestX1,Y1 56 63, ratio 3 330 2.87979 9.81059 70 81 -0.45388 74 73 Plotting coarse + nested grids at n= 330 Interpolating > nest to coarse; step 331, nestX1,Y1 56 63, ratio 3 Interpolating > nest to coarse; step 332, nestX1,Y1 56 63, ratio 3 Interpolating > nest to coarse; step 333, nestX1,Y1 56 63, ratio 3 Interpolating > nest to coarse; step 334, nestX1,Y1 56 63, ratio 3 NEST CHECK at time step 335 Max trunc error = 2.9811 bounded by ( 64: 77 , 78: 86); center = ( 70, 82) Old nest saved: X1,X2,Y1,Y2= 56 91 63 98 MOVING nest; N=335 TruncErr center 70 82 nest bounds: X = ( 53: 88), Y = ( 65:100) Interpolating > coarse to nest w/nest copy; step 335, nestX1,Y1 53 65, ratio 3 Dointerp: copying from old nest ( 1: 97, 7:106) to new ( 10:106, 1:100); 86.3% overlap Interpolating > coarse to nest w/nest copy; step 335, nestX1,Y1 53 65, ratio 3 Dointerp: copying from old nest ( 1: 97, 7:106) to new ( 10:106, 1:100); 86.3% overlap Interpolating > nest to coarse; step 335, nestX1,Y1 53 65, ratio 3 Interpolating > nest to coarse; step 336, nestX1,Y1 53 65, ratio 3 Interpolating > nest to coarse; step 337, nestX1,Y1 53 65, ratio 3 Interpolating > nest to coarse; step 338, nestX1,Y1 53 65, ratio 3 Interpolating > nest to coarse; step 339, nestX1,Y1 53 65, ratio 3 NEST CHECK at time step 340 Max trunc error = 2.8667 bounded by ( 61: 75 , 79: 86); center = ( 68, 82) Old nest saved: X1,X2,Y1,Y2= 53 88 65 100 MOVING nest; N=340 TruncErr center 68 82 nest bounds: X = ( 51: 86), Y = ( 65:100) Interpolating > coarse to nest w/nest copy; step 340, nestX1,Y1 51 65, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 340, nestX1,Y1 51 65, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap Interpolating > nest to coarse; step 340, nestX1,Y1 51 65, ratio 3 340 2.96706 9.88171 65 83 -0.45369 72 78 Plotting coarse + nested grids at n= 340 Interpolating > nest to coarse; step 341, nestX1,Y1 51 65, ratio 3 Interpolating > nest to coarse; step 342, nestX1,Y1 51 65, ratio 3 Interpolating > nest to coarse; step 343, nestX1,Y1 51 65, ratio 3 Interpolating > nest to coarse; step 344, nestX1,Y1 51 65, ratio 3 NEST CHECK at time step 345 Max trunc error = 2.9925 bounded by ( 59: 72 , 80: 87); center = ( 65, 83) Old nest saved: X1,X2,Y1,Y2= 51 86 65 100 MOVING nest; N=345 TruncErr center 65 83 nest bounds: X = ( 48: 83), Y = ( 66:101) Interpolating > coarse to nest w/nest copy; step 345, nestX1,Y1 48 66, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 345, nestX1,Y1 48 66, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap Interpolating > nest to coarse; step 345, nestX1,Y1 48 66, ratio 3 Interpolating > nest to coarse; step 346, nestX1,Y1 48 66, ratio 3 Interpolating > nest to coarse; step 347, nestX1,Y1 48 66, ratio 3 Interpolating > nest to coarse; step 348, nestX1,Y1 48 66, ratio 3 Interpolating > nest to coarse; step 349, nestX1,Y1 48 66, ratio 3 NEST CHECK at time step 350 Max trunc error = 2.9611 bounded by ( 56: 69 , 81: 88); center = ( 62, 84) Old nest saved: X1,X2,Y1,Y2= 48 83 66 101 MOVING nest; N=350 TruncErr center 62 84 nest bounds: X = ( 45: 80), Y = ( 67:102) Interpolating > coarse to nest w/nest copy; step 350, nestX1,Y1 45 67, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 350, nestX1,Y1 45 67, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap Interpolating > nest to coarse; step 350, nestX1,Y1 45 67, ratio 3 350 3.05433 9.82074 59 84 -0.45933 68 82 Plotting coarse + nested grids at n= 350 Interpolating > nest to coarse; step 351, nestX1,Y1 45 67, ratio 3 Interpolating > nest to coarse; step 352, nestX1,Y1 45 67, ratio 3 Interpolating > nest to coarse; step 353, nestX1,Y1 45 67, ratio 3 Interpolating > nest to coarse; step 354, nestX1,Y1 45 67, ratio 3 NEST CHECK at time step 355 Max trunc error = 2.8731 bounded by ( 53: 67 , 81: 88); center = ( 60, 84) Old nest saved: X1,X2,Y1,Y2= 45 80 67 102 MOVING nest; N=355 TruncErr center 60 84 nest bounds: X = ( 43: 78), Y = ( 67:102) Interpolating > coarse to nest w/nest copy; step 355, nestX1,Y1 43 67, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap Interpolating > coarse to nest w/nest copy; step 355, nestX1,Y1 43 67, ratio 3 Dointerp: copying from old nest ( 1:100, 1:106) to new ( 7:106, 1:106); 94.3% overlap Interpolating > nest to coarse; step 355, nestX1,Y1 43 67, ratio 3 Interpolating > nest to coarse; step 356, nestX1,Y1 43 67, ratio 3 Interpolating > nest to coarse; step 357, nestX1,Y1 43 67, ratio 3 Interpolating > nest to coarse; step 358, nestX1,Y1 43 67, ratio 3 Interpolating > nest to coarse; step 359, nestX1,Y1 43 67, ratio 3 NEST CHECK at time step 360 Max trunc error = 2.9662 bounded by ( 51: 64 , 82: 88); center = ( 57, 85) Old nest saved: X1,X2,Y1,Y2= 43 78 67 102 MOVING nest; N=360 TruncErr center 57 85 nest bounds: X = ( 40: 75), Y = ( 68:103) Interpolating > coarse to nest w/nest copy; step 360, nestX1,Y1 40 68, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap Interpolating > coarse to nest w/nest copy; step 360, nestX1,Y1 40 68, ratio 3 Dointerp: copying from old nest ( 1: 97, 4:106) to new ( 10:106, 1:103); 88.9% overlap Interpolating > nest to coarse; step 360, nestX1,Y1 40 68, ratio 3 360 3.14159 9.95749 54 85 -0.46017 63 84 Plotting coarse + nested grids at n= 360 Plotting smax Plotting error field Error plotted. Grid 1 errors: max corr 0.9918 error: tot 0.00482 dissip 0.00004 disper 0.00479 Interpolating > coarse to nest; step 361, nestX1,Y1 40 68, ratio 3 Grid 2 errors: max corr 0.9915 error: tot 0.04126 dissip 0.00004 disper 0.04122